Table of Contents 1. Package Contents ..................3 2. Product Features.................... 4 3. Media Converter Chassis Front Panel ...............5 4. LED Indicators ....................6 5. Media Converter Chassis Rear Panel ..............7 6. Installing the Media Converter Chassis ............9 6.1 Installing Media Converter Chassis in 10-/19-inch Wire Closet Rack ....9 6.2 Installing Converters in Media Converter Chassis ........
1. Package Contents Before starting installing the Converter, verify the following parts in the package: z Media Converter Chassis x 1 z User’s Manual x 1 z Mounting Accessory (for 10/19” Chassis Shelf) x 1 z Rubber Feet x 4 z AC Power Cord x 1 If any of these are missing or damaged, please contact your dealer immediately;...
Supports up to 7 or 15 hot-swappable media converters z One fan provides an effective system cooling, and LED indicators for system and fan status (MC-700) z Two fans provides an effective system cooling, and LED indicators for system and...
3. Media Converter Chassis Front Panel Figures 3-1, 3-2 and 3-3 show the front panels of MC-700, MC-1500, MC-1500R and MC-1500R48. Figure 3-1: MC-700 Front Panel Figure 3-2: MC-1500 Front Panel Figure 3-3: MC-1500R/1500R48 Front Panel...
4. LED Indicators MC-700 Printing LED Status Description The chassis is powered. The chassis is not powered or power fails, if the AC outlet is with 100~240V AC voltage. Please consult your local dealer if power fails. The fan is functional.
Figures 5-1, 5-2 and 5-3 show the rear panels of MC-700, MC-1500 and MC-1500R/ MC-1500R48. The rear panel of the MC-700 comes with one fan, one ON/OFF switch and a power inlet that accepts 100~240V AC, 50/60Hz power input. Figure 5-1: MC-700 Rear Panel The rear panel of the MC-1500 comes with two fans, one ON/OFF switch and a power inlet that accepts 100~240V AC, 50/60Hz power input.
Page 8
1. The MC-1500R is shipped with one 100~240V AC power supply module (MC-15RPS200). 2. The MC-1500R48 is shipped with one -48V DC power supply module (MC-15RPS48). Caution and shock hazard: Remove all power cords before removing top cover. Connect only to a properly earth grounded outlet.
6. Installing the Media Converter Chassis 6.1 Installing Media Converter Chassis in 10-/19-inch Wire Closet Rack Place four screws through mounting ears on each side. Locate Converter Chassis at 10/19-inch mounting rails and screw up the front brackets. ...
Page 10
Rack Mount Instructions A) Elevated Operating Ambient -- If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
DC receptacle. Push up the picket fence to lock the converters. The slide-in Media Converters and Converter Chassis should be supplied only from PLANET; both Media Converters and Chassis are built to match each other as far as dimensions, DC power jack, and DC receptacle and power safety are concerned.
7. Product Specifications MC-700 Converter Chassis Specifications Dimensions 217 x 88.5 x 140 mm (W x H x D), 2U height Converter Slots 7 slots Power Input 100~240V AC, 50/60Hz Power Consumption 40 watts maximum/136BTU Power Output Per Slot +5V DC DC Plug Per Slot 2.5 mm DC receptacle...
Page 13
MC-1500R/MC-1500R48 Converter Chassis Specifications Model MC-1500R MC-1500R48 Dimensions 440 x 103 x 180 mm (W x H x D), 2.4U height Converter Slots 15 slots 100~240V AC, 3.3A, -48V DC 2A, Power Input 50-60Hz Range: -40V ~ -60V 10.7 watts/36BTU 5.3 watts/18BTU (1 x power supply, (1 x power supply,...
Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve you issue. If you need more support information, please contact PLANET Media Converter support team.
Page 15
FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 16
WEEE Warning To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.
Need help?
Do you have a question about the MC-700 and is the answer not in the manual?
Questions and answers