communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
1. Overview The 10/19-inch Media Converter Chassis, MC-700, MC-1000R & MC- 1500 is designed to accommodate 7/10/15 units of various type media converter at a central location for multiple segments cross connection. Independent power supply in each bay of the MC-700/MC-1000R/MC- 1500, you can freely install the converters without interrupting the rest of networks.
2. Checklist Before you start installing the Converter, verify that the package contains the following: • The Media Converter Chassis • Mounting Accessory (for 10/19” Chassis Shelf) • This User’s Manual • AC Power Cord Please notify your sales representative immediately if any of the above- mentioned items is missing or damaged.
3. Panel Description The front panel of the MC-700 is as below: • 7 open slots for media converters • 2 LED indicators for system and fans Fig. 1 Front View of 10-inch Converter Chassis MC-700 LED indications: Printing LED Status Description The chassis is powered.
Page 9
The rear panel of the MC-700 is with one fan, one ON/OFF Switch and a power inlet that accept 100~240V AC, 50/60Hz power input. Fig. 2 Rear view of MC-700 The front panel of the MC-1000R is as below: • 10 open slots for media converters •...
Page 10
LED indications: Printing LED Status FAN A / FAN B The rear panel of the MC-1000R is with two fans, one ON/OFF Switch and a power inlet that accept 100~240V AC, 50/60Hz power input. Fig. 4 Rear view of MC-1000R The front panel of the MC-1500 is as below: •...
Page 11
LED indications: Printing LED Status FAN A / FAN B The rear panel of the MC-1500 is with two fans, one ON/OFF Switch and a power inlet that accept 100~240V AC, 50/60Hz power input. Fig. 6 Rear view of MC-1500 1.
4. Installation 4.1 Installing Media Converter Chassis to 10/19-inch Wiring Closet Rack • Install four screws through mounting ears into each side • Locate Converter Chassis at 10/19-inch mounting rails and screw up the front brackets • Set Main power switch at “OFF” position before connecting the power cord 4.2 Installing Converters to the Media Converter Chassis •...
4.3 Converter Check point Attach the fiber cable. The Tx, Fiber Rx fiber cable must be paired at Port both ends Attach UTP Cat. 3 or 5 cable to TP port MPR: To a Hub or Repeater Port DTE: To a workstation or NIC Slide switch “DTE”/”MPR”...
5. MC-700 Converter Chassis Specifications Dimension 217 mm x 88.5 mm x 140 mm (W x H x D) Converter slots 7 slots Power Input 100~240V AC, 50/60Hz Power Dissipation 22 watt maximum Power Output per +5V DC slot DC Plug per slot 2.5 mm DC receptacle LED indication 2;...
6. MC-1000R Converter Chassis Specifications Dimension 440 mm x 125 mm x 220 mm (W x H x D) Converter slots 10 slots Power Input 100~240V AC, 50/60Hz Power Dissipation 100 watts / one power unit Power Output per +5V DC slot DC Plug per slot 2.5 mm DC receptacle...
7. MC-1500 Converter Chassis Specifications Dimension 438 mm x 103 mm x 200 mm (W x H x D) Converter slots 15 slots Power Input 100~240V AC, 50/60Hz Power Dissipation 100 watt maximum Power Output per +5V DC slot DC Plug per slot 2.5 mm DC receptacle LED indication 3;...
Need help?
Do you have a question about the Media Converter Chassis MC-1000R and is the answer not in the manual?
Questions and answers