Subscribe to Our Youtube Channel
Related Manuals for Clarke SMDT5400
Summary of Contents for Clarke SMDT5400
- Page 1 TWIN LED WORKLIGHT(230V) MODEL NO: SMDT5400 PART NO: 4003642 USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0125...
-
Page 2: Technical Information
INTRODUCTION Thank you for purchasing this CLARKE portable LED worklight which can be used either indoors or outdoors. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS 1. This worklight must not be immersed in water. 2. DO NOT look directly into the lamp when switched on as this can damage the eyes. 3. DO NOT use this worklight if it has a broken lens, casing or damaged cable. 4. -
Page 4: Electrical Connections
ELECTRICAL CONNECTIONS WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is suitable. This product is designed to operate on 230VAC 50Hz. Connecting it to any other power source may cause damage. -
Page 5: Mounting On The Tripod
6. The LED light source (Epistar LED chip) cannot be replaced but has a life expectancy of approximately 30,000 hours. 7. DO NOT attempt to repair or modify this product or attempt any electrical repair yourself. Consult the CLARKE Service Department. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 6: Component Parts
COMPONENT PARTS Face frame O-ring 4mm glass End cap Reflector Cable gland Screw M3 x 6 Cable with plug LED panel Locking knob M6 Housing Lower bracket Angle adjusting knob H-stand Washer M6 Tripod stand Handle Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 7: Declarations Of Conformity
DECLARATIONS OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the SMDT5400 and is the answer not in the manual?
Questions and answers