Related Manuals for Clarke SAM127A
Summary of Contents for Clarke SAM127A
- Page 1 DESK MOUNTED MAGNIFYING LED LAMP MODEL NO: SAM127A PART NO: 54605367 ASSEMBLY & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC11/23...
- Page 2 INTRODUCTION Thank you for purchasing your CLARKE magnifying lamp, which is ideal for fine detail assembly and repair work, stamp collectors, model makers, jewellers, etc. Please note that this product is designed for indoor use only. Before using this product, read this manual thoroughly, and follow the instructions carefully.
- Page 3 ASSEMBLY AND OPERATION ASSEMBLY Your lamp is supplied in three parts;- • The lamp assembly with adjustable arms • The G-clamp • The holder Slide the G-clamp into the slot in the side of the holder, then slide the lamp assembly spiggot into the holder.
- Page 4 3. Keep the external surfaces clean. Avoid impact damage & DO NOT allow this product to come into contact with abrasive or corrosive materials. 4. DO NOT use solvents, thinners or alcohol for cleaning, as these chemicals will damage the finish. With the lamp unplugged from the power supply, use a dry cloth to wipe over the lamp components.
- Page 5 COMPONENT PARTS Item No Description Lens Cover Plastic Head cover Lens T9/22W Lamp tube Diffuser On/Off Switch Ballast Plastic Back Cover Screws Swing Arm Assembly Lamp Holder Power adaptor/power cable Metal Handle G- clamp Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
- Page 6 DECLARATION OF CONFORMITY - UK Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
- Page 7 DECLARATION OF CONFORMITY - CE Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the SAM127A and is the answer not in the manual?
Questions and answers