Page 1
RECHARGABLE LED WORKLIGHT MODEL NO: COB10CR PART NO: 4003615 USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1119 ISS 2...
Page 2
INTRODUCTION Thank you for purchasing this CLARKE worklight. This work light with carry handle and floor stand is suitable for indoor or outdoor use. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
Page 3
This product incorporates a plug-in charger which cannot be re-wired. If lost or damaged, it must be replaced from your Clarke dealer. If in any doubt, consult a qualified electrician. This symbol indicates that the charger/lead is an electrical Class II product, and does not possess an earth connection.
Page 4
CHARGING THE BATTERY 1. Charge the battery before using the worklight for the first time and after every occasion of use if possible. 2. Charge thereafter, at least every 90 days or when needed. 3. Always avoid leaving your worklamp in a discharged state. FOLLOW THE ABOVE POINTS TO ENSURE MAXIMUM LIFE FROM THE BATTERY.
Page 5
Do not attempt to repair or modify this product or attempt any electrical repair yourself. Consult the Clarke Service Department on 020 8988 7400. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Page 6
ERP TECHNICAL INFORMATION Model COB10CR Part No 4003615 Model type LY9601H Dimensions (L x W x H) 166 x 186 x 255 mm Weight 1.3 kg Light Source COB LED Operating Temperature -20 to + 50 Input power (consumption) 10 W...
Page 7
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the COB10CR and is the answer not in the manual?
Questions and answers