Related Manuals for Clarke SMD4500
Summary of Contents for Clarke SMD4500
- Page 1 4500 LUMEN LED WORKLIGHT MODEL NO: SMD4500 PART NO: 4003540 INSTRUCTIONS FOR USE GC06/23...
-
Page 2: Technical Information
INTRODUCTION Thank you for purchasing this CLARKE Worklight. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS 1. This worklight must never be immersed in water. 2. DO NOT look directly into the lamp when switched on as this can harm the eyes. 3. If used with an extension cable always ensure that the extension cable is fully unwound. -
Page 4: Electrical Connections
ELECTRICAL CONNECTIONS WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved 13 amp BS 1363 plug, or a suitably fused isolator switch. If the plug has to be changed because it is not suitable for your socket, or because of damage, it must be removed and a replacement fitted, following the wiring instructions shown below. -
Page 5: Operation
7. DO NOT attempt to repair or modify this product or attempt any electrical repair yourself. Consult the CLARKE Service Department. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 6: Component Parts
COMPONENT PARTS Item Description Item Description Protective cover (optional) Cable with plug Face frame Power socket Lamp shade Screws st4x10 Sealing ring Carrying handle LED panel Hand grip Aluminium housing Cover plate Bracket for handle Screws M4x10 Sealing ring Switch Socket box Screws M3x6 Waterproof cable gland... -
Page 7: Declarations Of Conformity
DECLARATIONS OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the SMD4500 and is the answer not in the manual?
Questions and answers