INTRODUCTION Thank you for purchasing this CLARKE Worklight. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
SAFETY PRECAUTIONS 1. Do not use this worklight in hazardous locations, such as flammable or explosive environments. 2. If used with an extension cable always ensure that the extension cable is fully unwound. 3. Check that the power supply is compatable with the worklight as indicated on the label.
Page 4
ELECTRICAL CONNECTIONS WARNING! Read these electrical safety instructions thoroughly before connecting the product to the mains supply. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
Clean the lens at regular intervals using a non-abrasive glass cleaner. Immediately replace a cracked or broken protective glass. Always use original parts for this which can be purchased from your Clarke Spares Department. There are no other user serviceable parts inside the light. DO NOT disassemble the unit.
Page 6
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CL6FS and is the answer not in the manual?
Questions and answers