Subscribe to Our Youtube Channel
Related Manuals for Clarke SMD84T
Summary of Contents for Clarke SMD84T
- Page 1 SMD LED WORKLIGHT(230V) MODEL NO: SMD84T PART NO: 4003635 ASSEMBLY & USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1119 ISS 2...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE LED twin light worklamp with tripod, suitable for indoor or outdoor use. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
- Page 3 SAFETY PRECAUTIONS 1. This worklight must not be immersed in water. 2. Do not look directly into the lamp when switched on as this can damage the eyes. 3. If used with an extension cable always ensure that the extension cable is fully unwound.
- Page 4 ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS POWER SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
- Page 5 ASSEMBLY CONTENTS • Pair of lamps wired to the junction box & power cable. • Tripod assembly • Cross beam • Hand screws/nuts/washers ASSEMBLY The tripod assembly may be erected before attaching the other items. If the end/upper tripod extension is not visible, turn the locking ring and tilt the tripod to slide the extension to greater height.
- Page 6 8. Do not attempt to repair or modify this product or attempt any electrical repair yourself. Consult the Clarke Service Department on 020 8988 7400. ENVIRONMENTAL RECYCLING POLICY Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling &...
- Page 7 DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the SMD84T and is the answer not in the manual?
Questions and answers