Subscribe to Our Youtube Channel
Related Manuals for Clarke SMD42T
Summary of Contents for Clarke SMD42T
- Page 1 LED WORKLIGHT(230V) MODEL NO: SMD42T PART NO: 4003625 ASSEMBLY & USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0817 ISS 1...
-
Page 2: Specifications
INTRODUCTION Thank you for purchasing this CLARKE portable worklight. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS 1. This worklight must not be immersed in water. 2. Do not look directly into the lamp when switched on as this can damage the eyes. 3. If used with an extension cable always ensure that the extension cable is fully unwound. - Page 4 ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS POWER SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
- Page 5 ASSEMBLY & MOUNTING The tripod stand is supplied fully assembled. 1. Pull the legs apart to erect the tripod and set in position with the leg locking screw. 2. Adjust the height of the tripod column by twisting the locking rings anti-clockwise to release, and sliding the tubes to the required height before twisting...
- Page 6 7. Never use unauthorised accessories or attachments which can cause personal injury or damage to the product. 8. Do not attempt to repair or modify this product or attempt any electrical repair yourself. Consult the Clarke Service Department on 020 8988 7400. REPLACEMENT TRIPOD PARTS Lamp Head...
- Page 7 DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the SMD42T and is the answer not in the manual?
Questions and answers