Subscribe to Our Youtube Channel
Related Manuals for Clarke SMD42C
Summary of Contents for Clarke SMD42C
- Page 1 SMD-LED WORKLIGHT(230V) MODEL NO: SMD42C PART NO: 4003610 ASSEMBLY & USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0817 ISS 1...
-
Page 2: Specifications
INTRODUCTION Thank you for purchasing this CLARKE portable worklight. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS 1. This worklight must not be immersed in water. 2. Do not look directly into the lamp when switched on as this can damage the eyes. 3. If used with an extension cable always ensure that the extension cable is fully unwound. -
Page 4: Electrical Connections
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS POWER SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz. -
Page 5: Assembly & Use
ASSEMBLY & USE Mount the lamp to the stand using the hand screw as shown. The worklamp can be tilted forward and back as required. Switch on/off using the rocker switch on the rear of the lamp. CARE & STORAGE 1. -
Page 6: Environmental Recycling Policy
8. Do not attempt to repair or modify this product or attempt any electrical repair yourself. Consult the Clarke Service Department on 020 8988 7400. ENVIRONMENTAL RECYCLING POLICY Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling &... -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the SMD42C and is the answer not in the manual?
Questions and answers