Related Manuals for Clarke SMD5000
Summary of Contents for Clarke SMD5000
- Page 1 LED WORKLIGHT(230V) MODEL NO: SMD5000 PART NO: 4003545 ASSEMBLY & USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0724...
-
Page 2: Technical Information
INTRODUCTION Thank you for purchasing this CLARKE portable LED worklight which can be used either indoors or outdoors. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS 1. This worklight must NOT be immersed in water. 2. DO NOT look directly into the lamp when switched on as this can damage the eyes. 3. If used with an extension cable always ensure that the extension cable is fully unwound. -
Page 4: Electrical Connections
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS POWER SUPPLY. Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved BS 1363 plug, or a suitably fused isolator switch. If the plug has to be changed because it is not suitable for your socket, or because of damage, it must be removed and a replacement fitted, following the wiring instructions shown below. -
Page 5: Component Parts
COMPONENT PARTS Light Tube Handle On/Off Switch Light tube release button Power outlet Cable winder Tripod leg locker ASSEMBLY & USE Expand the tripod legs to the maximum degree. Flip the light tube over to the vertical position. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 6: Care And Storage
8. DO NOT attempt to repair or modify this product or attempt any electrical repair yourself. Consult the CLARKE Service Department on 020 8988 7400. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 7: Declarations Of Conformity
DECLARATIONS OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the SMD5000 and is the answer not in the manual?
Questions and answers