U-Line H-11905 Manual
U-Line H-11905 Manual

U-Line H-11905 Manual

Premium platform scale
Hide thumbs Also See for H-11905:

Advertisement

Available languages

Available languages

Quick Links

H-11905, H-11906
H-11907
PREMIUM PLATFORM
SCALE
WARNING! Explosion hazard.
CAUTION! Keep children away from battery.
CAUTION! Do not burn battery.
CAUTION! Corrosion hazard.
• The load placed on the weighing pan must not
exceed the maximum weighing capacity of the
scale.
• Place the scale on a firm, level surface free from
vibrations for accurate weight readings.
• Adjust the four leveling feet (if fitted) to set the scale
pan level.
• Avoid operating the scale in direct sunlight or drafts
of any kind.
• If possible, avoid connecting the scale to AC power
outlet sockets that are adjacent to other appliances
to minimize the possibility of interference affecting
performance of the scale.
• Remove any weight on the weighing pan before the
scale is switched on and avoid leaving weight on
the pan for long periods of time.
• All goods weighed should be placed in the center
of the weighing pan for accurate weighing. The
overall dimensions of the goods being weighed
should not exceed the dimensions of the weighing
pan.
PAGE 1 OF 21
1-800-295-5510
uline.com
SAFETY
• Protect the scale from high temperatures.
• Avoid objects impacting the scale. Do not drop
loads onto the scale or subject the weighing pan
to any strong shock loads.
• Operate or charge the scale in an open area. Do
not squeeze the power cord, which may result in
the wire overheating and catching on fire.
• The battery's electrolyte is caustic and causes
metal, cotton, etc. to corrode.
• Charge battery in a well-ventilated area away from
sparks or open flame.
SETUP
• Once the scale has been powered on, it will go
through an LCD display test. Scale is ready for use
when the display shows zero.
• The scale requires 15-20 minutes to warm up before
operation to ensure best accuracy.
BATTERY STORAGE
• Scale uses a fully sealed, maintenance-free battery.
Customer does not need to replenish electrolyte.
• The scale should be recharged every three months
to prevent failure of the internal rechargeable
battery.
• The battery takes 8-10 hours to fully recharge.
• The temperature of battery should not exceed 113°F.
Para Español, vea páginas 8-14.
Pour le français, consulter les pages 15-21.
NOTE: When the
symbol keeps flashing on
the screen, the batteries need to be charged.
0225 IH-11905

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H-11905 and is the answer not in the manual?

Questions and answers

Summary of Contents for U-Line H-11905

  • Page 1 Para Español, vea páginas 8-14. Pour le français, consulter les pages 15-21. H-11905, H-11906 1-800-295-5510 H-11907 uline.com PREMIUM PLATFORM SCALE SAFETY WARNING! Explosion hazard. • Protect the scale from high temperatures. • Avoid objects impacting the scale. Do not drop loads onto the scale or subject the weighing pan CAUTION! Keep children away from battery.
  • Page 2: Overview Of Controls

    OVERVIEW OF CONTROLS CONTROL PANEL CONTROL PANEL KEYS DESCRIPTION On/Off Key Key Functions Key Net/Gross Weight Key Unit Key STABLE GROSS HOLD Zero Key Wireless TARE UNIT ZERO GROSS PRINT Charging Tare/PT Key M+/Print Key CONTROL FUNCTIONS BUTTON PRIMARY FUNCTION SECONDARY FUNCTION ON/OFF ------------...
  • Page 3: Lcd Display

    LCD DISPLAY DISPLAY DISPLAY CHARACTERS CHARACTER DISPLAY CHARACTER DISPLAY Zero Point Indicator Stable Indicator Net Weight Indicator Gross Weight Indicator Unit Weight Insufficient Low Power Indicator Indicator Unit "kilogram" Pre-tare Indicator Unit "pound" (Hold) Weight Hold Indicator Counting Mode Indicator M+ Indicator Upper Limit OZ Unit Indicator...
  • Page 4: Operation

    OPERATION ON/OFF KEY • If there is tare, the pre-tare cannot be done. If there is pre-tare first, and the tare weight is more than Press the ON/OFF key to switch the indicator on or off. pre-tare weight, tare can be done. •...
  • Page 5: Self-Test Mode

    OPERATION CONTINUED SIMPLE COUNTING MODE KEYPAD TEST MODE ( 02 KEY KEY 06 Press TARE/PT key to enter. Display shows Use UNIT key to switch unit to "Pcs" to go into simple counting mode. 2. Keypad's internal code: Use NET/GROSS key to select a sample number from •...
  • Page 6: Power Supply

    POWER SUPPLY POWER SUPPLY SELECTION LOW BATTERY WARNING • 110/230 V AC +/–15, 60/50 Hz, 10 W (plugged-in) • When the symbol keeps flashing on the display, the internal battery should be recharged. • 6 V/4 Ah rechargeable battery • The scale will turn off automatically after a few hours POWER CONSUMPTION when the low battery warning symbol is displayed.
  • Page 7: Technical Data

    TECHNICAL DATA WEIGHT UNITS UNIT DEFINITION 1 g. = 0.001 kg. 1 g. = 1 g. 1 g. = 0.002204623 lb. lb./oz. 1 g. = 0.03527396 oz. 1 g. = 0.03527396 oz. 1 g. = 15.432358 GN 1 g. = 0.6430149 dwt 1 g.
  • Page 8: Almacenamiento De La Batería

    H-11905, H-11906 800-295-5510 H-11907 uline.mx BÁSCULA DE PLATAFORMA PREMIUM SEGURIDAD ¡ADVERTENCIA! Peligro de explosión. • Proteja la báscula de altas temperaturas. • Evite que los objetos golpeen la báscula. No deje ¡PRECAUCIÓN! Mantenga a los niños lejos de la caer cargas en la báscula ni someta la bandeja batería.
  • Page 9: Panel De Control

    RESUMEN DE LOS CONTROLES PANEL DE CONTROL TECLAS DEL PANEL DE CONTROL DESCRIPCIÓN Tecla On/Off (Encendido/Apagado) Tecla de Función Tecla Net/Gross Weight (Peso Neto/Bruto) Tecla Unit (Unidad) STABLE GROSS HOLD Wireless TARE Tecla Zero (Cero) UNIT ZERO GROSS PRINT Charging Tecla Tare/PT (Tara/Tara Predefinida) Tecla M+/Print (M+/Imprimir) FUNCIONES DE CONTROL...
  • Page 10: Pantalla Lcd

    PANTALLA LCD PANTALLA CARACTERES DE PANTALLA CARACTER PANTALLA CARACTER PANTALLA Indicador de Punto Cero Indicador de Estabilidad Indicador de Peso Neto Indicador de Peso Bruto Indicador de Insuficiencia Indicador de Batería Baja de Peso de la Unidad Unidad "kilogramo" Indicador de Pretara Unidad "libra"...
  • Page 11 FUNCIONAMIENTO TECLA DE ENCENDIDO/APAGADO • La tara se puede realizar continuamente hasta que el valor de tara = capacidad de carga total. Presione la tecla ON/OFF (encendido/apagado) por dos • Tara Continua – Presione la tecla TARE/PT para segundos para encender o apagar el indicador. aumentar/disminuir el peso continuo en la bandeja.
  • Page 12 CONTINUACIÓN DE FUNCIONAMIENTO MODO DE AUTOPRUEBA • Para borrar los datos de totalización, presione la tecla M+/PRINT para que los números de Con la báscula apagada, mantenga presionada la totalización aparezcan en pantalla, luego presione tecla NET/GROSS y presione la tecla ON/OFF. Espere la tecla M+/PRINT de nuevo para borrar los datos 0 1 AdC hasta que la pantalla muestre...
  • Page 13: Fuente De Energía

    CONTINUACIÓN DE FUNCIONAMIENTO MODO DE VISUALIZACIÓN DE LA VERSIÓN DE RETROCEDER A LA ÚLTIMA PANTALLA ( 00 ESC FIRMWARE ( 03 GEr Presione la tecla TARE/PT para salir del modo del autoprueba. La báscula se volverá a encender Presione la tecla TARE/PT para ingresar. La pantalla 02005 automáticamente.
  • Page 14: Códigos De Error

    SOLUCIÓN DE PROBLEMAS CÓDIGOS DE ERROR CÓDIGO DE ERROR EXPLICACIÓN La memoria EEPROM no funciona correctamente. La memoria EEPROM aún no está configurada, o el circuito de la placa de circuito impreso (PCB) está averiado. El cero es más alto que el rango cero al encender el indicador. El cero es más bajo que el rango cero al encender el indicador.
  • Page 15: Entreposage De La Batterie

    H-11905, H-11906 1 800 295-5510 H-11907 uline.ca BALANCE À PLATEFORME DE PREMIÈRE QUALITÉ SÉCURITÉ AVERTISSEMENT! Risque d'explosion. • Protéger la balance des températures élevées. ARRÊT • Éviter que des objets n'entrent en contact avec la MISE EN GARDE! Tenir les enfants à l'écart de la balance.
  • Page 16: Aperçu Des Commandes

    APERÇU DES COMMANDES PANNEAU DE TOUCHES DU PANNEAU DE COMMANDES DESCRIPTION COMMANDES Touche marche/arrêt Touche des fonctions Touche de poids net/brut Touche des unités STABLE GROSS HOLD Wireless TARE Touche Zero UNIT ZERO GROSS PRINT Charging FONCTIONS DES Touche Tare/PT COMMANDES Touche d'impression M+/Print BOUTON...
  • Page 17: Écran Acl

    ÉCRAN ACL ÉCRAN CODES D'AFFICHAGE CODE AFFICHAGE CODE AFFICHAGE Indicateur du point zéro Indicateur de stabilité Indicateur du poids net Indicateur du poids brut Indicateur de puissance Indicateur de poids unitaire faible insuffisant Unité « kilogramme » Indicateur de pré-tare (Hold) Indicateur de maintien Unité...
  • Page 18 FONCTIONNEMENT TOUCHE MARCHE/ARRÊTZ • Tarage en continu – Appuyez sur la touche TARE/PT pour augmenter/diminuer continuellement le poids Appuyez sur le touche ON/OFF (marche/arrêt) pour du plateau. allumer ou éteindre l'indicateur. • Lorsque qu'un tarage est en cours, le pré-tarage ne peut être effectué.
  • Page 19 FONCTIONNEMENT SUITE MODE DE COMPTAGE SIMPLE 3. Vérifiez si le rétroéclairage est allumé. 4. Appuyez sur la touche ZERO pour retourner au Utilisez la touche UNIT (unités de pesage) pour passer des 0 1 AdC dernier écran. L'écran affiche unités aux « Pcs » et aller en mode de comptage simple. Utilisez la touche NET/GROSS (poids net/brut) pour choisir un nombre d'échantillons de « 10, 20, 50, C 10...
  • Page 20: Source D'alimentation

    SOURCE D'ALIMENTATION CHOIX DE LA SOURCE D'ALIMENTATION AVERTISSEMENT DE BATTERIE FAIBLE • 110/230 V c.a., +/- 15, 60/50 Hz, 10 W (branché) • Lorsque le symbole continue de clignoter à l'écran, la batterie interne doit être rechargée. • Batteries rechargeables 6 V/4 Ah •...
  • Page 21: Données Techniques

    DONNÉES TECHNIQUES UNITÉS DE PESAGE UNITÉ DÉFINITION 1 g = 0,001 kg. 1 g = 1 g. 1 g = 0,002204623 lb. lb./oz. 1 g = 0,03527396 oz. 1 g = 0,03527396 oz. 1 g = 15,432358 GN 1 g = 0,6430149 dwt 1 g = 5 ct.

This manual is also suitable for:

H-11906H-11907

Table of Contents