U-Line H-1649 Manual

U-Line H-1649 Manual

Easy-count scales
Hide thumbs Also See for H-1649:

Advertisement

Available languages

Available languages

H-1649, H-1650, H-1651
π
H-1653, H-1654
Easy-Count sCalEs
AvOId PlAcInG tHE scAlE In lOcAtIOns
tHAt mAy Hurt AccurAcy:
1. temperature extremes – do not place in direct
sunlight or near air heat/cooling vents.
2. mounting surface must be firm and level – do
not place on uneven or wobbly surfaces or near
vibrating machinery.
3. unstable power sources – Keep away from big
electricity-using machines like welding equipment or
large motors.
4. Keep scale dry – do not place in high humidity,
damp or wet locations.
5. Keep away from air movers like fans or open doors
and windows.
6. Keep scale clean and dry.
7.
do not stack items on the scale when not in use.
CAUTION! Scale is not waterproof. Avoid
direct contact with water, high humidity and
condensation. Do not spray or immerse scale
in water. Data may become unstable or scale
may malfunction. Turn power off and allow
scale to dry before reuse.
lcd dIsPlAy
Low Battery
Stable
HI
OK
LO
Check Weighing
PAGE 1 OF 27
1-800-295-5510
uline.com
GENERAL INFORMATION
Percentage Weighing
Parts Counting
Weighing Unit
Pour le français, consulter le pages 10-18.
dIsPlAy cHArActErs
CHARACTER
DISPLAY
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
Para en Español, vea páginas 19-27.
CHARACTER
DISPLAY
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0713 IH-1649

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H-1649 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for U-Line H-1649

  • Page 1 Pour le français, consulter le pages 10-18. Para en Español, vea páginas 19-27. H-1649, H-1650, H-1651 π 1-800-295-5510 H-1653, H-1654 uline.com Easy-Count sCalEs GENERAL INFORMATION AvOId PlAcInG tHE scAlE In lOcAtIOns dIsPlAy cHArActErs tHAt mAy Hurt AccurAcy: CHARACTER DISPLAY CHARACTER DISPLAY 1.
  • Page 2: Specification

    SPECIFICATION MODEL # H-1653/H-1654 H-1649 H-1650 H-1651 3kg / 6 lbs. 6kg / 12 lbs. 15kg / 30 lbs. 30kg / 60 lbs. mAXImum cAPAcIty mInImum cAPAcIty AccurAcy (dIv) 0.1g /.0002 lbs. 0.2g /.0005 lbs. 0.5g /.001 lbs. 1g /.002 lbs.
  • Page 3: Installation

    INSTALLATION stainless steel platform is packed separately. 5. Power switch is located on the bottom right side of the scale. remove set screw on bottom of scale. Level Feet Power Switch 2. level the scale. Adjust the 4 feet and reference bubble on top of scale to level.
  • Page 4 OPERATION CONTINUED PArts cOuntInG cOntInuEd Both Limits set: • the display shows OK when the weight is within 5. Press the ZErO/EntEr key when the displayed the limits. number matches the number of items used in the sample. As more weight is added, the display shows Low Limit set, High Limit set to zero: the number of pieces (pcs).
  • Page 5: Change The Baud Rate

    OPERATION CONTINUED mAnuAl AccumulAtIOn AutOmAtIc AccumulAtIOn When the scale is set for manual accumulation: When scale is set for Automatic Accumulation: Press the Acc key to store the displayed weight in 1. Add a weight to the scale. the beeper sounds when the memory when the weight is stable.
  • Page 6: Battery Operation

    FUNCTIONS CONTINUED cHAnGE unIt OF WEIGHt dIsPlAyEd cHAnGE tHE AutOmAtIc POWEr OFF dElAy select kilograms, grams, ounces or pounds. display shows power auto off time, select one of the following: Press tArE/^ to select. • turns off auto off function. 2.
  • Page 7: Calibration Weights

    ZErO and % keys together. # (see below). Incorrect calibration will lead to loss of accuracy. 3. Press tArE/^ to return to normal operation. cAlIBrAtIOn WEIGHts cAPAcIty sEttInGs Model # H-1654 H-1653 H-1649 H-1650 H-1651 Model # H-1654 H-1653 H-1649 H-1650 H-1651...
  • Page 8 TROUBLESHOOTING CONTINUED OPErAtInG IssuE cAusEs rEcOmmEndAtIOns display blank after turn-on Pan not installed. check if pan is installed correctly. test; error message display is unstable weight. turn the scale on again. locked. load cell or mechanics damaged. mechanics damaged. Ol or Full displayed. maximum capacity exceeded.
  • Page 9: Error Codes

    TROUBLESHOOTING CONTINUED OPErAtInG IssuE cAusEs rEcOmmEndAtIOns Off center loading error. Adjust mechanics. look for obstruction under pan and verify pan installation. Overload stops not correct. load cell damaged. Battery will not charge. main voltage not present or too low. verify the batteries are rechargeable types.
  • Page 10: Renseignements Généraux

    H-1649, H-1650, H-1651 π 1-800-295-5510 H-1653, H-1654 uline.ca BALANCE DE COMPTAGE ECONOMY RENSEIGNEMENTS GÉNÉRAUX ÉvItEZ dE PlAcEr lA BAlAncE dAns dEs cArActÈrEs d’AFFIcHAGE EndrOIts quI PEuvEnt AvOIr un ImPAct IndÉsIrABlE sur lA PrÉcIsIOn : CHARACTER DISPLAY CHARACTER DISPLAY températures extrêmes : ne placez pas la balance au soleil ou près des bouches de chauffage/...
  • Page 11: Spécification

    SPÉCIFICATION N° DE MODèLE H-1653/H-1654 H-1649 H-1650 H-1651 cAPAcItÉ mAXImAlE 3kg / 6 lbs. 6kg / 12 lbs. 15kg / 30 lbs. 30kg / 60 lbs. cAPAcItÉ mInImAlE PrÉcIsIOn (dIv) 0.1g /.0002 lbs. 0.2g /.0005 lbs. 0.5g /.001 lbs. 1g /.002 lbs.
  • Page 12: Pesage En Pourcentage

    INSTALLATION la plateforme en acier inoxydable est emballée 5. l’interrupteur d’alimentation se trouve du côté inférieur séparément. droit de la balance. retirez la vis de réglage au bas de la balance. Pieds de nivellement Interrupteur d’alimentation 2. nivelez la balance. Ajuster les 4 pieds et bulle de référence située en haut de la balance pour procéder au nivellement au niveau de référence.
  • Page 13: Pesage De Vérification

    FONCTIONNEMENT (SUITE) cOmPtAGE d’ÉlÉmEnts (suItE) Les deux limites réglées : • l’affichage indique OK si le poids est conforme aux 5. Appuyer sur la touche ZErO/EntEr lorsque le nombre limites. affiché correspond au nombre d’éléments utilisé dans l’échantillon. À mesure que du poids supplémentaire est Limite inférieure réglée, limite supérieure réglée sur zéro : ajouté, l’affichage indique le nombre d’éléments (pcs).
  • Page 14 FONCTIONNEMENT (SUITE) AccumulAtIOn mAnuEllE AccumulAtIOn AutOmAtIquE Lorsque la balance est réglée pour l’accumulation Lorsque la balance est réglée pour l’accumulation manuelle : automatique : Appuyez sur la touche Acc pour enregistrer le poids Ajoutez un poids sur la balance. l’avertisseur sonore affiché dans la mémoire une fois le poids stable. retentit lorsque le poids est stable afin d’indiquer que le poids est ajouté.
  • Page 15: Fonctionnement De La Batterie

    FONCTIONS (SUITE) mOdIFIEr lEs unItÉs dE POIds AFFIcHÉEs mOdIFIEr lE dÉlAI d’Arrêt AutOmAtIquE sélectionnez kilogrammes, grammes, onces ou livres. l’affichage indique la fonction de délai d’arrêt automatique. sélectionnez l’une des options suivantes : Appuyez sur tArE/^ pour sélectionner. • Fonction d’arrêt automatique désactivée. 2.
  • Page 16: Dépannage

    3. Appuyez sur tArE/^ pour revenir au fonctionnement chaque numéro de modèle (voir ci-dessous). Un étalonnage incorrect entraînera une dégradation normal. de la précision. PArAmÈtrEs dE cAPAcItÉ POIds d’ÉtAlOnnAGE Nº de modèle H-1654 H-1653 H-1649 H-1650 H-1651 Nº de modèle H-1654 H-1653 H-1649 H-1650 H-1651 court...
  • Page 17 DÉPANNAGE (SUITE) PrOBlÈmE dE FOnctIOnnEmEnt cAusEs rEcOmmAndAtIOns l’affichage est vide après le test le plateau n’est pas installé. vérifiez que le plateau est de démarrage; message d’erreur correctement installé. le poids est instable. « display is locked » (Affichage rallumez la balance. la cellule de charge est bloqué) endommagée.
  • Page 18: Codes D'erreur

    DÉPANNAGE (SUITE) PrOBlÈmE dE FOnctIOnnEmEnt cAusEs rEcOmmAndAtIOns Erreur « Off center loading » réglez le système mécanique. recherchez la présence d’une (charge décentrée) obstruction sous le plateau et vérifiez les butées de surcharge sont son installation. incorrectes. la cellule de charge est endommagée.
  • Page 19: Información General

    H-1649, H-1650, H-1651 π 01-800-295-5510 H-1653, H-1654 uline.mx BÁSCULA CONTADORA INFORMACIÓN GENERAL EvItE cOlOcAr lA BÁsculA En sItIOs quE cArActErEs En PAntAllA PudIErAn AFEctAr lA PrEcIsIÓn: CARÁCTER PANTALLA CARÁCTER PANTALLA temperaturas extremas - no coloque en la luz del sol directa o cerca de salidas de aire acondicionado o calefacción.
  • Page 20: Especificaciones

    ESPECIFICACIONES MODELO # H-1653/H-1654 H-1649 H-1650 H-1651 3kg / 6 lbs. 6kg / 12 lbs. 15kg / 30 lbs. 30kg / 60 lbs. cAPAcIdAd mÁXImA cAPAcIdAd mÍnImA PrEcIsIÓn (dIv) 0.1g /.0002 lbs. 0.2g /.0005 lbs. 0.5g /.001 lbs. 1g /.002 lbs.
  • Page 21: Instalación

    INSTALACIÓN Plataforma de acero inoxidable está empacada por 5. El interruptor para encender está localizado en la separado. parte inferior derecha de la báscula. retire tornillo de fijación de parte inferior de báscula. Patas para Nivelación Interruptor 2. nivele la báscula. Ajuste las 4 patas y la burbuja de referencia en parte superior de báscula para nivelar.
  • Page 22 CONTINUACIÓN DE FUNCIONAMIENTO cOntInuAcIÓn dE cOntEO dE PArtEs Ambos Límites configurados: • la pantalla muestra OK cuando el peso está dentro 5. Presione la tecla ZErO/EntEr cuando coincida el de los límites. número en pantalla con el número de artículos utilizados como muestra.
  • Page 23 CONTINUACIÓN DE FUNCIONAMIENTO AcumulAcIÓn mAnuAl AcumulAcIÓn AutOmÁtIcA Cuando la báscula es configurada para acumulación Cuando la báscula es configurada para Acumulación manual: Automática: Presione la tecla Acc para almacenar el peso Agregue peso a báscula. Emitirá sonido cuando el mostrado en la memoria cuando el peso se estabilice. peso se estabilice para indicar que peso es agregado.
  • Page 24: Duración De La Batería

    CONTINUACIÓN DE FUNCIONES cAmBIE lA unIdAd dE PEsO mOstrAdA cAmBIE El tIEmPO dE dEmOrA dEl APAGAdO AutOmÁtIcO seleccione kilogramos, gramos, onzas o libras. Pantalla muestra tiempo para apagado automático, Presione tArE/^ para seleccionar. seleccione uno de los siguientes: 2. Presione ZErO/EntEr para establecer su selección. • desactiva la función de apagado automático.
  • Page 25: Solución De Problemas

    (vea abajo). Calibración incorrecta 3. Presione tArE/^ para regresar al funcionamiento causará pérdida de precisión. normal. PEsAs PArA cAlIBrAcIÓn cOnFIGurAcIOnEs dE cAPAcIdAd Modelo # H-1654 H-1653 H-1649 H-1650 H-1651 Modelo # H-1654 H-1653 H-1649 H-1650 H-1651 Pesa 1...
  • Page 26 CONTINUACIÓN DE SOLUCIÓN DE PROBLEMAS PrOBlEmA dE FuncIOnAmIEntO cAusAs rEcOmEndAcIOnEs Pantalla en blanco después de la Plataforma sin instalar. revise que plataforma esté prueba de encendido; muestra un correctamente instalada. Peso inestable. mensaje de error bloqueado. Encienda de nuevo la báscula. celda de carga dañada.
  • Page 27: Código De Error

    CONTINÚA SOLUCIÓN DE PROBLEMAS PrOBlEmA dE FuncIOnAmIEntO cAusAs rEcOmEndAcIOnEs sin linealidad. sobrecarga deja de golpear muy Busque la obstrucción debajo de pronto. plataforma y verifique instalación de plataforma. celdas de carga o mecanismo dañado. configure linealidad. A/d dañado. Error por carga fuera del centro. Ajuste mecánico.

This manual is also suitable for:

H-1650H-1651H-1653H-1654

Table of Contents

Save PDF