Four-Wire Hybrid Indoor Station User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could Caution result in equipment damage, data loss, performance degradation, or...
Four-Wire Hybrid Indoor Station User Manual Regulatory Information EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
Page 4
Four-Wire Hybrid Indoor Station User Manual Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité...
Four-Wire Hybrid Indoor Station User Manual Chapter 1 Quick Operation After powering on, the wizard page will pop up. Steps 1. Select language and tap Next. Figure 1-1 Select Language 2. Connect to Mobile Phone.
Page 8
Four-Wire Hybrid Indoor Station User Manual Figure 1-2 Connect to Mobile Phone - If you would like to connect your device to your mobile phone, tap Connect. You will then set Wi-Fi parameters. - Or you can tap Skip to skip this step and connect later. The device will then automatically check the connection between the door station and indoor station.
Page 9
Four-Wire Hybrid Indoor Station User Manual Figure 1-3 Connect to Wi-Fi 4. Add your device to your mobile phone and tap Next. Scan the first QR code to download the App of Guarding Vision and scan the second QR code to add your device to the App. 5.
Four-Wire Hybrid Indoor Station User Manual Chapter 2 Configuration on Device 2.1 Call Settings 2.1.1 Ringtone Settings You can set the ringtone on call settings page. Steps 1. Tap Settings → to enter the call settings page. Figure 2-1 Call Settings 2.
Four-Wire Hybrid Indoor Station User Manual Figure 2-2 Volume Settings Page 2. Set the prompt sound volume and the call volume of the indoor station. 3. Set speaker volume for analog doorphone. 4. Optional: Enable Touch Sound to turn on the sound when you touch device screen. 2.2 Link to the Mobile Client Before You Start Note...
Four-Wire Hybrid Indoor Station User Manual Note Scan the left QR code on the screen to access Guarding Vision. ● Scan the right QR code on the screen to add the device to the mobile client. ● 2.3 Set Wi-Fi Set Wi-Fi connection.
Four-Wire Hybrid Indoor Station User Manual Note Only when enable Alarm in the shortcut settings, can the Zone Settings displayed on the Preference page. Set the zone parameters. For details, see . Scene Settings Note Only when enable Alarm in the shortcut settings, can the Scene Settings displayed on the Preference page.
Page 14
Four-Wire Hybrid Indoor Station User Manual Figure 2-4 General Settings Page Password You can manage your arm/disarm password and scene password. For details, see Modify Arm/ Disarm Password Time and Date You can set the displayed time and date format, current time. You can also tap Sync Time and enable NTP to synchronize the device time.
Four-Wire Hybrid Indoor Station User Manual Note After enabling Clear Screen function, press and hold the Unlock key to exit the clear screen ● mode. The device without unlock key will exit the clear screen mode automatically when the time is ●...
Four-Wire Hybrid Indoor Station User Manual 1) Select the Time Zone. 2) Enable Enable NTP. 3) Set the synchronizing interval, enter the IP address/domain of NTP server and port No. Note The default unit of synchronizing interval is minute. ● The time zone can be configured as well if the NTP is not enabled.
Four-Wire Hybrid Indoor Station User Manual Figure 2-6 System Maintenance Restore Default Settings Tap Restore Default Settings to restore the default settings and reboot the system. Restore All Tap Restore All to restore all parameters and reboot the system. Wizard Tap Wizard and set the language.
Four-Wire Hybrid Indoor Station User Manual Figure 2-7 Set Doorphone Live View Duration Tap Doorphone 1 or Doorphone 2 to set corresponding live view duration. 2.8.5 Video Standard Video standard is an ability of a video card or video display device that defines the amount of colors that are shown and the resolution.
Four-Wire Hybrid Indoor Station User Manual Chapter 3 Other Operations on Device 3.1 Receive Call The indoor station can receive calls from the analog doorphones. Tap the capture button to capture and save the live view picture when speaking with the door station.
Four-Wire Hybrid Indoor Station User Manual Note Indoor extension does not support this function. ● The indoor station saves call logs from doorphones. ● 3.2.2 View Capture Logs Steps 1. Tap Message → to enter the capture log page. Figure 3-2 Capture Logs 2.
Four-Wire Hybrid Indoor Station User Manual Note Up to 200 alarm logs can be saved. 3.3 Live View On the live view page, you can view the live video of linked doorphone. Steps Note Make sure the doorphones are well-connected. ●...
Four-Wire Hybrid Indoor Station User Manual 3.4 Arm/Disarm The indoor station has four kinds of scene modes: sleeping mode, stay mode, away mode, and custom mode. You can arm or disarm your room in each scene mode manually. The selected scene mode will be displayed on the main page of the indoor station.
Four-Wire Hybrid Indoor Station User Manual 3.4.2 Disarm Room Steps 1. Tap → One-Push to Disarm at the upper-right corner of the home page to disarm. Figure 3-5 Disarm Room 2. Enter the arm/disarm password. Note You can set the arm/disarm password in the general settings. 3.
Page 24
Four-Wire Hybrid Indoor Station User Manual 1. Back to the home page, tap Settings → → Scene Settings to enter the arming mode settings page. 2. Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page. 3. Arm the selected zone. Note Zones are configurable on the arming mode page.
Need help?
Do you have a question about the HA-KIT-H1 and is the answer not in the manual?
Questions and answers