Vision Tech Shop VLP-100B Quick Reference

Quick Reference
VLP-100B
Label Printing Scale
Programming Quick Reference Guide
The following procedures should be performed from the normal weigh mode screen. Some
procedures require a password. When prompted, enter your password. If none has been
assigned to you or your password does not allow you to access a particular program, call your
Service Representative for assistance.
Store Info
Press the key and 1 1 key. Enter the
desired Store information 1 and 2 and press the
key.(Up to 60 characters and spaces.
Depending on the font size on the label, not all
characters will print.) Store info 1 and 2 will be
printed on the bottom of the label.
Date and Time
Press the key and then press1 2 1 key. Enter
the current Date in the correct format (MMDDYY)
and press the key.
Quick Reference
MENU + S1
MENU + S2
1-201-970-8897 ▪ www.VisionTechShop.com
Enter the current Time and press the
next item to select is the symbol or punctuation mark
that separates the Date. This is usually a dash but
you can select any character or symbol that you
want. Select the symbol and press the
last item to program is the date format. Select the
date format and press the
the key three times or press the
key.
key .The
key. The
key. To exit press
or