Download Print this page

Queclink GL530MG Quick Start

Download this manual

GL530MG Quick Start

Page 1:

Basic Instructions

Check the parts list.

Toggle the battery switch from the OFF po-

sition to the On position to power on the

device.

Find the PL2303_Prolific_DriverInstaller_v1190

zip file and choose the suitable driver for your

computer system. If you have already installed

it, please go to

Step

Please note that the battery of the device

isn't rechargeable.

Check the device appearance.

Connect the device to the computer by using the

5-pin data cable. Note: The cable is an optional

accessory.

To computer

Run Queclink_GL530MG_Manage_Tool_Rx.xx.exe

application in developer suite to configure parameters

of the device. Please refer to

Page 2

Please place the device in an open area and

let the side with LED indicators face up as

shown.

for details.

Need help?

Do you have a question about the GL530MG and is the answer not in the manual?

Page 1 GL530MG Quick Start Page 1: Basic Instructions Check the parts list. Check the device appearance. Toggle the battery switch from the OFF po- Connect the device to the computer by using the sition to the On position to power on the 5-pin data cable.
Page 2 Send to send the fence. For other advanced functions, please refer to the command to the device. GL530MG @Track Air Interface Protocol or reach out to our FAE team at support@queclink.com. For more info, please visit: Website: www.queclink.com...