Queclink GL521MG Quick Start

Hide thumbs Also See for GL521MG:

Download this manual

GL521MG Quick Start V1.00

Page 1:

Basic Operation

Check Parts List

Make sure there is no missing part.

Unscrew the device and then long press the

button for more than 3 seconds to turn it on.

Find "PL2303_Prolific_DriverInstaller_vxxxx" and

choose the suitable driver for your computer system.

If you have already installed it, please go to Step 6.

Charge the GL521MG with wireless charging pad

(ordered separately).

Check The Appearance

Connect GL521MG to your computer with 4-pin data

cable (ordered separately).

To computer

Find "Queclink_GL521M_Manage_Tool_Vx.xx.exe" in developer

suite and run it to configure the parameters of GL521MG.

Please refer to Page 2 for details.

Better place the GL521MG under the open sky and

let the surface with LED indicators face the sky.

Need help?

Do you have a question about the GL521MG and is the answer not in the manual?

Page 1 To computer Find “PL2303_Prolific_DriverInstaller_vxxxx” and Find “Queclink_GL521M_Manage_Tool_Vx.xx.exe” in developer suite and run it to configure the parameters of GL521MG. choose the suitable driver for your computer system. Please refer to Page 2 for details. If you have already installed it, please go to Step 6.
Page 2 Page 2: PC Manage Tool Quick Start If you want to test the GL521MG via SMS, set “Report Run the Manage Tool. Select correct COM port and Mode” to “Force on SMS” and input the phone number to input default password “gl521m”. Then press Try to receive the SMS from GL521MG.