Advertisement
Quick Links
GL53MG(Plus) Quick Start Guide
Page 1:
Basic Instructions
Check the parts list
GL53MG(PLUS)
and GL53MG(PLUS) USB Cable 0.5M
are optional accessories and may not
delivered along.
To turn on the device, you can turn on the battery switch or long
press the key button for more than 3 seconds.
Battery
switch ON
Connect the device to computer by using the UART Cable.
Close the case and tighten the screws.
UART Cable 0.5M
Power Key
Button
UART Port
To computer
Open the case.
Find the PL2303_Prolific_DriverInstaller_v1190.
zip and the qud.win.1.1_installer_10061.1.zip files
in developer suite and install the former driver
for PL2303 and the latter driver for USB. If you
have already installed them, please go to
Run Queclink GL53MG(PLUS) Manage Tool Vx.xx.exe
application in developer suite to configure parameters
of the device. Please refer to
Install a SIM card.
Step
6.
Page 2
for details.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Queclink GL53MG
Summary of Contents for Queclink GL53MG
- Page 1 Step Battery switch ON Power Key Button Run Queclink GL53MG(PLUS) Manage Tool Vx.xx.exe Connect the device to computer by using the UART Cable. application in developer suite to configure parameters of the device. Please refer to Page 2 for details.
- Page 2 After these steps, the device should activate basic track- ing functions such as wake-up report and Geo-Fence. For other advanced functions, please refer to GL53MG(PLUS) @Track Air Interface Protocol or reach out to our FAE team at support@queclink.com.
Need help?
Do you have a question about the GL53MG and is the answer not in the manual?
Questions and answers