Restoring Your Monitor To The Default Settings - Omron BP5465 Instruction Manual

6. Other Settings
6.2

Restoring Your Monitor to the Default Settings

To delete all the information stored in your monitor, follow the
instructions below. Make sure that your monitor is turned off.
1. While holding the
the [START/STOP] button for more than 3 seconds.
The display as below flashes.

2. While holding the
hold the [START/STOP] button for more than 3
seconds.
The display stops flashing, then your monitor is restored to the
default settings.

3. Press the [START/STOP] button to turn your
monitor off.
Note
• After the completion, the year flashes on the display. Refer to
sub-section 2.3 to set the date and time manually, or refer to
sub-section 4.1 to pair your monitor with a smart device to set
the date and time automatically.
• Reverting to the default setting of your monitor does not delete
the information in the app.

EN46
button down, press and hold
button down again, press and