Do you have a question about the BP5450 and is the answer not in the manual?
Questions and answers
James
May 25, 2025
My device does not seem to connect to my smart phone by Bluetooth. How do I make that happen?
1 comments:
Mr. Anderson
May 26, 2025
To connect the Omron BP5450 to your smartphone via Bluetooth:
1. Make sure the monitor is off. 2. Press and hold the Bluetooth button on the back of the monitor for over 2 seconds to activate Bluetooth. The message "on" will appear. 3. Open the “OMRON connect US/CAN” app on your smartphone. 4. Follow the app instructions to pair your device (refer to sub-section 4.1 in the manual). 5. If Bluetooth is already active and the monitor is waiting for pairing, the Bluetooth symbol will flash. 6. To cancel pairing, press the [START/STOP] button.
Page 1
How To Use The Omron Model BP5450 Blood Pressure Monitor 1. Insert the air plug into the air jack To read the entire manual securely until it clicks . visit: 2 . Place your hand through the cuff https://library.beau.org/libra loop, then pull the cuff until it ry-of-things/ reaches your upper left arm .
Page 2
To protect your personal information, please follow this step before check-in : 3. Press the [START/STOP] button to turn your monitor off. FAQ 1 : Why are my blood pressure readings sometimes different? Your blood pressure changes constantly based on your daily activities & time of day. So some fluctuations can be expected.
Need help?
Do you have a question about the BP5450 and is the answer not in the manual?
Questions and answers
My device does not seem to connect to my smart phone by Bluetooth. How do I make that happen?
To connect the Omron BP5450 to your smartphone via Bluetooth:
1. Make sure the monitor is off.
2. Press and hold the Bluetooth button on the back of the monitor for over 2 seconds to activate Bluetooth. The message "on" will appear.
3. Open the “OMRON connect US/CAN” app on your smartphone.
4. Follow the app instructions to pair your device (refer to sub-section 4.1 in the manual).
5. If Bluetooth is already active and the monitor is waiting for pairing, the Bluetooth symbol will flash.
6. To cancel pairing, press the [START/STOP] button.
This answer is automatically generated