Messages And How To React To Them - Pioneer AVIC N1 - Navigation System With DVD player Operation Manual

Symptom
No subtitles are displayed.
Playback is not with the audio lan-
guage and subtitle language settings
selected in DVD SETUP.
Switching the viewing angle is not
possible.
The picture is extremely unclear/dis-
torted and dark during playback.

Messages and how to react to them

The following messages may be displayed by your Navigation System.
❒ There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Message
You cannot use this function while
driving.
This is not the appropriate disc.
Please insert the appropriate disc.
Irregular speed pulse signal is
detected. Please power off the sys-
tem and check the installation. After
you have checked, please re-boot the
system and press "OK".
Speed pulse wire is not connected.
System will start to learn without
speed pulse. Please keep in mind
that accuracy is not fully ensured
without speed pulse.
Vibration is detected. Please power
off the system and check the installa-
tion. After you have checked, please
re-boot the system and press "OK".
Sensor NG (Vibration)
Cause
The DVD playing does not feature
subtitles.
You can only switch between items
indicated in the disc menu.
The DVD playing does not feature
dialog or subtitles in the language
selected in DVD SETUP.
The DVD playing does not feature
scenes shot from multiple angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
The disc features a signal to prohibit
copying. (Some discs may have this.)
When
While trying to make a menu selec-
tion.
If you try to use a disc which is
incompatible with this system
(including the old version map disc).
If you insert a disc upside down.
If the disc is dirty.
If the disc is cracked or otherwise
damaged.
If the Navigation unit does not
receive the vehicle speed pulse.
The speed signal input (pink lead
wire) of the power cable is not con-
nected.
While the vehicle is stationary, the
Navigation System is installed in a
place where the navigation unit may
be affected by a large vibration.
Action (See)
Subtitles are not displayed if they are
not recorded on the disc.
Switch using the disc menu.
Switching to a selected language is
not possible if the language selected
in DVD SETUP is not recorded on the
disc.
You cannot switch between multiple
angles if the DVD does not feature
scenes recorded from multiple
angles.
Switch between multiple angles
when watching scenes recorded
from multiple angles.
Since this unit is compatible with the
copy guard analog copy protect sys-
tem, when playing a disc that has a
signal prohibiting copying, the pic-
ture may suffer from horizontal
stripes or other imperfections when
viewed on some displays. This does
not mean this unit is malfunctioning.
What to do
Pull over and come safely to a halt,
put the parking brake on, and then
try again.
Insert a suitable disc.
Insert the disc with the label upward.
Clean the disc.
Insert a normal, round disc.
Consult your Pioneer dealer.
To operate with 3D hybrid mode, con-
nect the speed signal input (pink
lead wire) of the power cable cor-
rectly. Although it can be operated
with Simple hybrid mode without
connecting the speed signal input,
the precision of the positioning will
be less accurate.
Re-install the navigation unit of the
Navigation System in a place where
the navigation unit will not be
affected by vibration.
107