About The Icon For The Memory Navi Mode; Major Difference Between The Memory Navi Mode And The Dvd Navi Mode - Pioneer AVIC N1 - Navigation System With DVD player Operation Manual

Shortcut menu
:Destination
:Chg.Route
:Registration
:Vicinity Search
:Overlay POI
About the icon for the memory
navi mode
When new route guidance starts, the route data
from the map disc is read into the memory of the
navigation unit. The status of the memory navi
mode is indicated by the following icons on the
top left of the map screen.
(green flashes): Reading the data
(green is lit): Operated in memory navi mode
(red is lit): Operated in memory navi mode,
but the distance for guidance is 12.5 mi or less.
❒ Where the distance for navigation guidance is
unknown, the icon flashes red. In that case,
the guidance may suddenly fail. It is therefore
recommended to reinsert the map disc.
When disappears, memory navi mode is
ready. You can now remove the map disc and use
the memory navi mode function.
❒ If you want to remove the map disc while pre-
paring for the memory navi mode, press the
EJECT button more than 2 seconds. When
the map disc is removed, data cannot be read
and preparation for memory navi mode will
accordingly be canceled. (Since the reading
of the map data used in the memory navi
mode is not complete, the map scale may
switch to a larger scale. In this case, route
guidance will continue up to the location
already memorized.)
In memory navi mode, you will be notified in three
cases: when the distance to the edge of the mem-
orized area is 12 mi (20 km), 6 mi (10 km) and 3
mi (5 km) respectively.
Preparation for memory navi mode will have to be
repeated if the vehicle enters an unrecorded
area, then returns to an area stored in the disc.
(Preparation for the memory navi mode starts
from the location where the vehicle re-entered
the area stored on the disc.)
100
Major difference between the
✕
memory navi mode and the DVD
"
navi mode
_
✕
• Free zooming of scale is not available.
✕
• Detailed city map cannot be displayed.
• If a route was set to your destination in mem-
ory navi mode, inserting the map disc automat-
ically starts recalculation of another route.
(You cannot cancel this reroute operation. If
the route calculation fails for some reason, a
message will appear asking you to either recal-
culate a route (Reroute) or delete the current
route (Delete route). In this case, drive for a
while before touching either "Reroute" or
"Delete route" to delete the current route, then
reset the destination.)
• In some cases, you may not be able to use map
display mode during DVD navi mode. If the
map display mode is not changed during
memory navi mode, when the disc is set next
time, the display will return to the map display
mode used during the DVD navi mode.
• In memory navi mode, map scale data that
cannot be read in the memory cannot be dis-
played. Accordingly, the edge of the map will
appear cut off along the point it was not read
into memory. This simply indicates the edge of
the map data, and is not a malfunction.
• If you keep driving or scrolling the map to a
point where the map can no longer be dis-
played, the scale automatically switches to a
range possible to display. If you would like to
continue driving or scrolling the map at the
same scale, set the map disc in the navigation
unit.
• If the route is set and the vicinity area of the
route is stored in the memory, map matching
is performed. If you continue to drive outside
the route for a while, you may not be able to
perform map matching.
• If you deviate from the route during memory
navi mode, the route has been set will be
rerouted, but only to return you to the original
route calculated within the memorized area.