Connecting Wires To Terminals - Kenwood KDC-C521FM - CD Changer With RF Modulator Instruction Manual

Connecting Wires to Terminals

Display unit
Control input
FM modulator unit
2WARNING
To prevent fire when the ignition wire (Red) or battery wire
(Yellow) is short-circuited by coming into contact with the
vehicle chassis (ground), only connect the power supply after
making the fuse box connections.
2CAUTION
Be sure to press the reset button after installation.
Control output
Changer connection wire 4
CD auto - changer input
FM/AM antenna input
FM/AM antenna output
+
Ignition wire (Red)
+
Battery wire (Yellow)
-
Ground wire (Black) (To car chassis)
— 17 —
CD auto-changer
Antenna plug
for automobile
Car stereo
with FM tuner
Ignition key
switch
ACC
Car fuse box
Battery
NOTE
Do not install an antenna of radio equipment or distribute
the antenna wire near the changer output wire, for this
could cause malfunction with this unit.
Output