Kenwood KDC-C521FM - CD Changer With RF Modulator Instruction Manual page 20

Troubleshooting Guide
The messages shown below display your systems condition.
EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
➪
Load the disc magazine properly.
NO DISC: No disc has been loaded in the disc magazine.
➪
Load a disc into the disc magazine.
TOC Error: No disc has been loaded in the disc magazine.
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
➪
Clean the CD and load it correctly.
E-77: The unit is malfunctioning for some reason.
➪
Press the reset button on the display unit. If the "E-77" code does not disappear, consult your nearest service center.
Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
➪
Check the disc magazine, and then press the reset button on the display unit. If the "Mecha Error" code does not disappear,
consult your nearest service center.
Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.
➪
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F),
the disc will start playing again.
E02
E04
E77
E0d
— 20 —
E01
E99