Kenwood KDC-C521FM - CD Changer With RF Modulator Instruction Manual page 19

?
Sound skips due to vibration.67
✔ Something is touching the CD auto-changer.
☞ Keep it away from the CD auto-changer.
✔ The disc is dirty or
damaged.68
☞ If sound skips at the same part, the disc is faulty. Check and, if
possible, clean the disc.
✔ Changer unit is mounted on the a
☞ Mount the unit so that is level.
✔ Changer unit is mounted in an unstable
☞ Mount the unit in a stable place.
✔ The angle adjustment switches are set
☞ Set the angle adjustment switches to the correct positions.
?
Sound quality is poor.67
✔ The recording of the disc is poor.
☞ Try playing another disc. If the sound is good, the fault was with the
original disc.
✔ The disc is dirty or
damaged.8
☞ Check and, if possible, clean the disc.
?
No sound is heard even though the information concerning the CD
auto-changer is displayed.67
✔ The radio volume is sets to the minimum level.
☞ Turn the radio volume up.
✔ The microcomputer does not function
☞ Press the Reset button of the display unit. (Page 3)
✔ The system is not connected
☞ Connect the system properly. See <Connecting Wires to
Terminals>. (Page 17)
slant.69
place.8
improperly.69
correctly.68
properly.69
— 19 —