Resetting Factory Default Settings; Changing The Language; Troubleshooting - DeLonghi Coffee Maker ESAM4400 Important Instructions Manual

Delonghi coffe maker instruction manual
Table of Contents

Advertisement

Available languages

Available languages

• Press the
strip (for example, if there are 3 squares on the test strip, press the button until WATER HARDNESS 3 is
displayed).
• Press the
button to confirm the value. The coffee maker is now programmed to provide the desca-
ling warning when necessary, based on the actual hardness of the water.

12.7 Resetting factory default settings

If you change the original values, the factory default values can be reset as follows:
• Press the
until the appliance displays:
• Press the
• Press the
button to reset the factory default values;
• Press the

13 CHANGING THE LANGUAGE

To change the language, proceed as follows:
• Press the
button for at least 5 seconds until the appliance displays:
and press the
sage in English.

14 TROUBLESHOOTING

MESSAGE
FILL TANK
GROUND TOO FINE
ADJUST grinder AND
open STEAM
EMPTY used coffee
CONTAINER
INSERT used coffee
button repeatedly until the number coincides with the number of squares on the test
button (the light over the button comes on) then press the
RESET TO DEFAULT NO
button and the appliance displays "RESET TO DEFAULT YES";
button to exit programming mode or
PRESS OK TO select ENGLISH
button for at least 3 seconds to confirm. The appliance then displays the setting mes-
The water tank is empty or is positioned
incorrectly.
The tank is dirty or encrusted with lime
scale.
The appliance cannot make coffee
The coffee runs off too slowly.
The grounds container is full or missing. •
After cleaning, the grounds container
has not been replaced.
to change other parameters
MEANING
button repeatedly
WHAT TO DO
Fill the water tank as described in sec-
tion 5, note 6 and insert it fully.
Rinse or descale the tank.
Turn the steam knob counterclockwise
(fig. 3) as described in section 5 note
10.
Turn the grinding regulator (fig. 15) one
click clockwise (see section 7).
Empty the grounds container and clean
as described in section 5, note 7, then
replace.
Open the service door and insert the
grounds container.
19

Advertisement

Table of Contents
loading

Table of Contents