Table of Contents
Advertisement
16.7 Resetting factory default settings (reset)
If you change the original values, the factory default values can be reset as follows:
• Press the
button then press
• Press the
button and the appliance displays "RESET TO DEFAULT YES:
• Press the
button to reset the factory default values;
• The appliance is now reset to the factory default settings and the READY message is displayed.
16.8 Washing process
This function can be used by technical service personnel only.
17 CHANGING THE LANGUAGE
To change the language, press the
installation message in various languages. To select the required language, follow the instructions in section
4.1 :
18 MEANING OF MESSAGE DISPLAYED AND WHAT TO DO
MESSAGE
FILL TANK
GROUND TOO FINE ADJUST MILL
AND
INSERT WATER SPOUT AND
PRESS OK
EMPTY GROUNDS CONTAINER
INSERT GROUNDS CONTAINER
ADD PRE-GROUND
COFFEE
FILL BEANS CONTAINER
DESCALE
20
repeatedly until the appliance displays:
RESET TO DEFAULT NO
button for at least 5 seconds until the appliance displays the
MEANING
•
The water tank is empty or is positioned
incorrectly.
•
The tank is dirty or encrusted with lime
scale.
•
The appliance cannot make coffee
•
The coffee runs off too slowly.
•
The grounds container is full or missing. •
•
After cleaning, the grounds container
has not been replaced.
•
With the function selected, the pre-
ground coffee has not been poured into
the funnel.
•
The coffee beans have run out.
•
If the coffee grinder is very noisy, this
means a small stone in the coffee beans
has blocked the mill.
•
This indicates the presence of lime scale
in the appliance.
WHAT TO DO
•
Fill the water tank as described in sec-
tion 6, note 6 and insert it fully.
•
Rinse or descale the tank.
•
Insert the hot water spout, press the
button and run off water from the spout
for a few seconds.
•
Turn the grinding regulator (fig. 12) one
click clockwise (see section 8).
Empty the grounds container and clean
as described in section 6, note 7, then
replace.
•
Open the service door and insert the
grounds container.
•
Add the ground coffee as described in
section 9.
•
Fill bean container.
•
Contact an authorized De' Longhi servi-
ce center.
•
The descaling procedure, described in
section 16.3, needs to be performed as
soon as possible.
Hide quick links:
Advertisement
Table of Contents
