Devon IT OptiPlex VDI Blaster Edition Administration Manual page 47

5
Autostart:-Enable this checkbox to automatically launch this session
after the thin client completes its boot procedure.
6
Auto Restart: Select Yes or Prompt to automatically restart the
connection.

Yes-Once the session is terminated, the session will automatically restart.
There is no way for the user to stop it from occurring.

Prompt-Once the session is terminated, the user will receive a YES/NO
prompt asking them if they wish to reconnect to the session.
Troubleshooting Tips for VMView Connection

If you set your session to full screen but the display covers only a fraction
of the entire screen, then your allocated RAM for the virtual desktop may
need to be set a little higher.

If certain features like foreign keymaps, CD-ROM, USB stick, or printer
redirection are not passing through to the virtual desktop session, check if
your VM is at the correct version. You can download the latest agent
software executables at VMware's website at:
http://www.vmware.com/downloads.

If you plan to use USB flash drives within your session, it is best to use
sticks formatted in FAT or NTFS. Long delays sometimes occur when
using flash drives formatted in FAT32. Other USB troubleshooting tips
can be found at the following VMware site:
http://kb.vmware.com/kb/1026991.
Connections | 47