Table of Contents
Advertisement
You will see your normal desktop screen once the Touch Screen is calibrated.
Calibration – Option 2
The second method of calibrating the hardware can be found in the DeTOS
Start Menu. Select Calibrate Touchscreen. You will see the gray calibration
screen.
Follow the steps from Option 1 to calibrate the touch screen.
NOTE: There is currently no way to configure the calibration of an individual device and
push that setting via the Devon IT Echo Management Console Dell Edition software.
Calibration files will not be persistent through rebooting, so the device must always have
to be calibrated when attempting to use a touch screen device with Devon IT VDI Blaster
Dell Edition.
NOTE: Re-imaging or updating your thin client will require you to re-calibrate the
device.
NOTE: If at any time the calibration seems inaccurate you can plug in a mouse and
attempt to re-calibrate the device.
18 | Getting Started
Advertisement
Table of Contents
Need help?
Do you have a question about the OptiPlex VDI Blaster Edition and is the answer not in the manual?
Questions and answers