Sounds - Devon IT OptiPlex VDI Blaster Edition Administration Manual

iv. Find the driver name of the printer you will are using. The
c. Connect to-Select the appropriate connection type from this
dropdown list. (USB or Parallel).
4
Press the Apply button to save. The printer changes will take place
immediately. No reboot is required.
5
Launching any of your RDP, Citrix ICA, or VMware View connections,
you will find your printer under the Printers and Faxes Window and it will
be automatically designated as the default printer.
NOTE: To redirect printing to all of your protocols such as rDesktop, make sure that all
options for redirection are enabled, including Printing and Disk Drive Mapping.

Sounds

This section allows you to adjust the master volume level for the terminal.
1
From the DeTOS Desktop, select DeTOS->Control Panel.
2
Click the Sound icon on the left-hand side of the Control Panel under
System.
3
Left-click and drag the bar left or right to decrease or increase the volume.
4 Press the Apply button to save. Your changes will take place
automatically.
driver name that appears here must be entered into the
Driver Name field exactly the same way – including spaces
and proper case. For example, if the driver name on the
server is reported as Lexmark E238, then you must type
Lexmark E238 into the Driver Name field. Values are
case sensitive.
Connections | 33