Vmware View - Devon IT OptiPlex VDI Blaster Edition Administration Manual

VMware View

The VMware View client allows you to connect to a VMware server, which in
turn, provides the end-user with their own virtual desktop session. The
following section describes the basic steps for configuring the View Client in
DeTOS.
1
Server Address-Enter the Hostname or IP address of your VMware
View Broker.
2
Credentials-Specify the User Name and Password of a user account you
wish to log on as.
3
Domain-Specifies the domain to log on to.
4 Desktop Name-If the user of this thin client should always connect to the
same desktop, then you may consider entering its name into this field. If
you choose to leave the field empty, then the user will be prompted to
select an available desktop at the time they connect to the VMware View
server.
46 | Connections