System Fan - HP dx2290 - Microtower PC Service & Reference Manual

System Fan

1. Prepare the computer for disassembly
2. Remove the access panel
3. Lay the computer down on its side for greater stability.
4. Disconnect the cable that connects the system fan to the system board.
5. Remove the screws that secure the fan to the chassis and remove the fan.
To install the fan, reverse the removal procedures.
50 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
(Preparation for Disassembly on page
(Access Panel on page 28).
26).