Assigning Device Names - Dell 2161DS-2 Install & User's Manual

When the Remote Console Switch discovers a cascaded switch, the port numbering changes to
accommodate each device under that switch. For example, if the switch is connected to ARI
port 6, the switch port is listed as 06 and each device under it is numbered sequentially 06-01,
06-02 and so on.
NOTE:
dialog box.
To assign a device type:
In the Devices dialog box, select the desired port number.
1
Click Modify. The Device Modify dialog box displays.
2
Figure 3-8. Device Modify Dialog Box
Choose or enter the number of ports supported by your cascaded switch and click OK.
3
Repeat steps 1 to 3 for each port requiring a device type to be assigned.
4
Click OK in the Devices dialog box to save settings.
5

Assigning Device Names

Use the Names dialog box to identify individual devices by name rather than by port number. The
Names list is always sorted by port order. Names are stored in the SIP module, so even if you move
the SIP/server to another ARI port, the name and configuration is recognized by the switch.
NOTE:
To access the Names dialog box:
Press <Print Screen> to launch the OSCAR
1
Click Setup - Names
2
NOTE:
updated. No mouse or keyboard input is accepted until the list update is complete.
NOTE:
36
Basic Operations
Changes made in the Device Modify dialog box are not saved until you click OK in the Devices
If a device is turned off, the respective SIP module does not appear in the Names list.
The Names dialog box displays.
.
If the server list changes, the mouse cursor turns into an hourglass as the list is automatically
If a SIP module is not assigned a name, the EID is used as the default name.
®
interface. The Main dialog box will display.