Click OK to save the settings and return to the Setup dialog box. Click X or press
2
<Escape> to return to the Main dialog box.
Click Commands. The Commands dialog box displays.
3
Click the Broadcast Enable checkbox to activate broadcasting. The Broadcast Enable
4
Confirm/Deny dialog box displays.
Click OK to enable the broadcast. Click X or press <Escape> to cancel and return to the
5
Commands dialog box.
If broadcasting is enabled, type the information and/or perform the mouse movements
6
that you would like to broadcast from the user station. Only devices in the list are
accessible.
NOTE:
To turn broadcasting off:
From the Commands dialog box, clear the Broadcast Enable checkbox.
44
Basic Operations
Any other user is disabled when broadcast mode is enabled.