Dell 2161DS-2 Install & User's Manual page 42

Figure 3-13. Diagnostics Dialog Box
As each test is finished, a pass (green circle) or fail (red x) symbol displays to the left of each
item as that test finishes. The following table details each of the tests.
Table 3-4. Diagnostic Test Details
Test
Firmware CRCs
Remote User Video
On-line SIP modules
Offline SIP modules
Suspect SIP modules
To run diagnostic tests:
If the OSCAR
1
appear.
Click Commands - Run Diagnostics. A warning message displays indicating that all users
2
will be disconnected.
Click OK to begin diagnostics.
3
or
Click X or press <Escape> to exit the dialog box without running a diagnostic test.
All users are disconnected and the Diagnostics dialog box displays.
4
As each test is finished, a pass (green circle) or fail (red x) symbol displays. The test is
5
complete when the last test's symbol displays.
42
Basic Operations
Description
Reports on the condition of the main board RAM
Reports on whether a digital video connection has been made to a digital device
Indicates the total number of currently connected and powered SIP modules
Indicates the number of SIP modules that were connected successfully in the
past and are turned off
Indicates the number of SIP modules that were detected, but are either
unavailable for connection or dropped packets during the ping tests
®
interface is not open, press <Print Screen>. The Main dialog box will