Safety Precautions; General - Dell 2161DS-2 Install & User's Manual

Safety Precautions

Use the following safety guidelines to help ensure your own personal safety and to help protect
your system and working environment from potential damage.
CAUTION:
The power supplies in your system may produce high voltages and energy hazards, which
can cause bodily harm. Only trained service technicians are authorized to remove the covers and
access any of the components inside the system. This warning applies to Dell™ PowerEdge™ servers
and Dell PowerVault™ storage systems.
This document pertains only to the Dell 2161DS-2/4161DS Console Switch. You should also
read and follow the additional safety instructions contained elsewhere:
• The Remote Console Switch Installation Guide included with your rack solution that
describes how to install your system into a rack.
• The User's Guide which provides information about setting up and operating your rack
mounted server system.
• The Avocent AutoView 1000R/2000R Installer/User's Guide if applicable.

General

• Observe and follow service markings.
• Do not service any product except as explained in your system documentation.
• Opening or removing covers that are marked with the triangular symbol with a lightning
bolt may expose you to electrical shock.
• Components inside these compartments should be serviced only by a trained service
technician.
– This product contains no serviceable components. Do not attempt to open.
• If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your trained service provider:
– The power cable, extension cable, or plug is damaged.
– An object has fallen into the product.
– The product has been exposed to water.
– The product has been dropped or damaged.
– The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat sources. Also, do not block cooling vents.
5