Smart Cover Sensor; Setting The Smart Cover Sensor Protection Level - Compaq 127507-008 - Deskpro EP - 64 MB RAM Software Reference Manual

Smart Cover Sensor

Level Setting
Level 0 Disabled
Level 1 Notify User
Level 2 Setup Password
Smart Cover Sensor is a combination of hardware and software
technology that can alert you when the computer cover or side
panel has been removed. There are three levels of protection, as
described in the following table:
Smart Cover Sensor Protection Levels
Description
Smart Cover Sensor is disabled (default).
When the computer is restarted, the screen displays a message indicating
that the computer cover or side panel has been removed.
When the computer is restarted, the screen displays a message indicating
that the computer cover or side panel has been removed. You must enter
the setup password to continue.

Setting the Smart Cover Sensor Protection Level

To set the Smart Cover Sensor protection level, complete the
following steps:
1. Turn on or restart the computer. If you are in Windows,
click Start Æ Shut Down Æ Restart the Computer.
2. When the F10 Setup message appears in the lower-right
corner of the screen, press the F10 key. Press Enter to
bypass the title screen, if necessary.
If you do not press the F10 key while the message is displayed,
you must turn the computer off, then on again, to access the utility.
3. Select Security, then Smart Cover and follow the
instructions on the screen.
4. Before exiting, click File Æ Save Changes and Exit.
Software Reference Guide 3-9