Running Diagnostic Tests - Compaq 127507-008 - Deskpro EP - 64 MB RAM Software Reference Manual

Running Diagnostic Tests

2-14 Compaq Software
If your version of Compaq Insight Personal Edition includes
diagnostic testing utilities, four tabs will appear next to
Overview: Test, Status, Log, and Error.
1. Select the Test tab.
2. Select one of the following options:
Quick Test—Runs a quick, general test on each
device with a minimal number of prompts.
Complete Test—Runs maximum testing of each
device with minimal prompts.
Custom Test—Runs only the tests you select. To
select specific devices or tests, find the device in the
list, then click the box beside each test to select or
deselect it. When selected, a red check mark appears in
the box.
3. Select Interactive Mode or Unattended Mode.
In Interactive Mode, the diagnostic software will prompt
you for input during tests that require it. Some tests require
interaction and will display errors or halt testing if selected
in conjunction with Unattended Mode.
4. Click the Begin Testing button.
Test Status is displayed, showing the progress and result of
each test.
5. If errors are found, click the Error tab to display more
detailed information and recommended actions. By
following the recommended actions, you may be able to
solve some problems yourself.
6. Click Print or Save the error information in case you need
to contact your Compaq authorized dealer, reseller, or
service provider for assistance.
7. To exit Compaq Insight Personal Edition, click File, then
click Exit.