Compaq 127507-008 - Deskpro EP - 64 MB RAM Software Reference Manual page 16

Heading
File
Storage
Computer Setup
Option
System Information
Set Time and Date
Save to Floppy
Restore from Floppy
Set Defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
Diskettes
Removable Media
IDE Devices
IDE Drive Timing
IDE Drive Translation
Boot Order
Description
Lists product name, processor
type/speed/stepping, CPU serial number,
system ROM date, system board revision,
installed memory size, and asset tracking
number.
Allows you to set system time and date.
Saves system configuration to a blank
1.44-MB diskette.
Restores system configuration from a
diskette.
Restores factory default settings.
Exits Computer Setup without applying or
saving any changes.
Saves changes to system configuration
and exits Computer Setup.
Lists the currently installed drive A
(preinstalled diskette drive) and drive B
devices.
Enables/disables removable media
booting and removable media writing.
Note: After saving changes to Removable
Media, the computer will restart. Turn the
computer off, then on, manually.
Lists information regarding IDE devices
connected to the system. ATAPI devices
(CD-ROM, DVD-ROM, tape) are listed as
ATAPI devices.
Allows you to set hard drive to Ultra-DMA
(Ultra-ATA), EDMA, or PIO mode
operation.
Enables/disables IDE drive translation.
Allows you to specify boot order of
installed peripheral devices (such as LS-
120 drive, diskette drive, hard drive, SCSI
drive, CD-ROM drive, or DVD-ROM
drive).
Software Reference Guide 2-5