Smart Cover Sensor - Compaq PW5100 Reference Manual

Smart Cover Sensor

Smart Cover Sensor is a combination of hardware and software technologies
that can alert you when the workstation cover has been removed. The following
table describes three levels of protection.
Level
Level 0
Level 1
Level 2
The following elements determine the behavior of the Smart Cover Sensor:
SW1-S1 (Switch 1 of Switch Block 1)—See the hood labels affixed to
the underside of the workstation cover if you need help locating the
switch on the system board.
The Setup Password—See "Setup Password" or "Clearing a Setup
Password" in this chapter to enable or disable the Setup Password.
The Smart Cover Sensor setting—Three settings are possible:
Disabled, Notify User, and Setup Password. See "Setup Password" in
this chapter to select the desired setting.
See Appendix G for a summary of the Smart Cover Sensor functions based on
the above three elements.
Smart Cover Sensor Protection Levels
Setting
Disabled Smart Cover Sensor is disabled.
Notify User When the workstation is restarted, the screen displays
a message indicating that the workstation cover has
been removed.
Setup Password When the workstation is restarted, the screen displays
a message indicating that the workstation cover has
been removed. You must enter the Setup Password to
continue.
Table 3-3
Description
Compaq Professional Workstation 5100 Reference Guide
3-17