Compaq 127507-008 - Deskpro EP - 64 MB RAM Software Reference Manual page 18

Computer Setup
Continued
Heading
Power
Advanced*
* These options should be used by advanced users only.
Option
Energy Saver
Timeouts
Energy Saver Options
Power-On Self Test
Onboard Devices
PCI Devices
ISA PnP Devices
Bus Options
Description
Allows you to set energy saver mode
to advanced, disabled, or minimal.
Allows you to enable/disable timeouts
or manually select timeout values.
Note: This selection will only appear
when energy saver mode is set to
advanced.
Allows you to set power button
configuration (on/off or
suspend/wakeup) and allows user to
enable/disable power LED blink in
suspend mode.
Note: This selection will not appear if
the energy saver mode is disabled.
Allows you to set POST mode
(QuickBoot or FullBoot) and
enables/disables POST messages.
Allows you to set resources for
onboard system devices (serial port,
parallel port, etc.).
Lists currently installed PCI devices
and their IRQ settings.
Allows you to reconfigure IRQ
settings for these devices or to
disable them entirely.
Lists current settings of Plug and Play
(PnP) devices and enables or
disables PnP devices.
Note: Will not appear if there are no
PnP devices currently installed.
Enables/disables PCI bus mastering,
PCI reset on warm boot, and PCI
VGA palette snooping. Also allows
you to set ISA back-to-back I/O
(fast/legacy) delay and bus priority
(ISA/PCI).
Software Reference Guide 2-7