Download
Share
Print this page
Advantech SOM-6898C3-U4A2E Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Computer Hardware
  5. SOM-6898C3-U4A2E
  6. Manual
Advantech SOM-6898C3-U4A2E Manual

Advantech SOM-6898C3-U4A2E Manual

Com express compact module
Hide thumbs

Advertisement

Quick Links

Download this manual
User Manual
SOM-6898
COM Express Compact Module

Advertisement

loading
Need help?

Need help?

Do you have a question about the SOM-6898C3-U4A2E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech SOM-6898C3-U4A2E

Summary of Contents for Advantech SOM-6898C3-U4A2E

  • Page 1 User Manual SOM-6898 COM Express Compact Module...

  • Page 2: Product Warranty (2 Years)

    No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.

  • Page 3: Declaration Of Conformity

    Class I, Division 2, Groups A, B, C and D indoor hazards. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.

  • Page 4: Warnings, Cautions, And Notes

    Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery.

  • Page 5: Safety Instructions

    The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
  • Page 6 Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage.  To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on.

  • Page 7: Table Of Contents

    Contents Chapter General Information ......1 Introduction ....................2 Specifications .................... 2 1.2.1 Board Information ................. 2 1.2.2 System Information ............... 2 1.2.3 Display ..................3 1.2.4 Expansion Interface ..............3 1.2.5 I/O ....................4 1.2.6 iManager 2.0 ................. 4 1.2.7 Mechanical and Environmental Specification .......
  • Page 8 Installation..61 S/W Introduction ..................62 Driver Installation ..................62 4.2.1 Windows Driver Setup ..............62 4.2.2 Other OS..................62 Advantech iManager ................63 Appendix A Assignment......... 65 SOM-6898 Type 6 Pin Assignment............66 Appendix B Watchdog Timer........ 71 Programming the Watchdog Timer ............72...

  • Page 9: Chapter 1 General Information

    Chapter General Information This chapter gives background information on the SOM-6898 CPU Computer on Module. Sections include:  Introduction  Specification  Functional Block Diagram...

  • Page 10: Introduction

    IO design more flexible. In addition, SOM-6898 adds mounting holes around the processor to strengthen the board structure and avoid board bending. Advantech iManager was designed to satisfy a lot of embedded application require- ments such as multi-level watchdog timer, voltage and temperature monitoring, and thermal protection through processor throttling, as well as LCD backlight on/off, brightness control, and embedded storage information.

  • Page 11: Display

    PCI Express x1: Supports default 5 ports PCIe x1 compliant. To PCIe Gen3* (8.0 GT/s) specification, several configurable combinations may need BIOS modifies. Please contact Advantech sales or FAE for more detail. (PCIe x1 Port #7 option with SATA2) Default...

  • Page 12: I/O

    AT: +8.5~20V – CMOS Battery: +3.3V  Power Requirement: – Test condition: SOM-6898C7-U8A1E (i7-7600U), ADVANTECH 16GB SO- DDR4-2133 I-GRD 2PCS, Windows 10 Pro, rated voltage DC +5.0V, +12.0V, +20.0V – Idle: 4.16W – Max: 24.61W (Burn In Test V8.1 Pro (1016) for 64-bit Windows) ...

  • Page 13: Functional Block Diagram

    Functional Block Diagram IMVP8 Option with LVDS Dual Channel DDR4 260pin SO-DIMM x 2 1866/2133MHz 7th Gen Intel® Core™ / eDP to LVDS Celeron® Processors (CH7511) Dual LVDS Channel* U-Series (SoC) * Default Setting DDI Port 2 HDMI / DisplayPort / DVI Option with Analog VGA DDI Port 2 DP Analog VGA*...
  • Page 14 SOM-6898 User Manual...

  • Page 15: Chapter 2 Mechanical Information

    Chapter Mechanical Information This chapter gives mechanical information on the SOM-6898 CPU Computer on Module. Sections include:  Board Information  Mechanical Drawing  Assembly Drawing...

  • Page 16: Board Information

    Board Information The figures below indicate the main chips on SOM-6898 Computer-on-Module. Be aware of these positions when designing your own carrier board to avoid mechanical issues, as well as designing a thermal solution with contact points for the best ther- mal dissipation performance.

  • Page 17: Mechanical Drawing

    Mechanical Drawing For more details about 2D/3D models, please look on the Advantech COM support service website http://com.advantech.com. 87.2 81.3 48.6 Figure 2.3 Board Mechanical Drawing - Front 87.2 83.5 31.7 Figure 2.4 Board Mechanical Drawing - Back SOM-6898 User Manual...

  • Page 18: Assembly Drawing

    Assembly Drawing These figures demonstrate the assembly order from the thermal module, COM mod- ule to the carrier board. Semi-cooler Heatspreader SOM-6898 Stand off Carrier Board Figure 2.5 Assembly Drawing Assembly Drawing Please consider the CPU and chip height tolerance when designing your thermal solution.
  • Page 19 Option 2 NOM: 1.18, TOL: ±0.092 (Post SMT stackup height based on limited data from Intel reference board design)F5= NOM: 1.213, TOL: ±0.108 (Pre SMT pack- age height) NOM: 1.16, TOL: ±0.108 ( Post SMT stackup height based on limited data from Intel reference board design) Figure 2.7 Main Chip Height and Tolerance (GT3) F5= NOM: 1.213, TOL: ±0.108 (Pre SMT package height) NOM: 1.16, TOL: ±0.108 ( Post SMT stackup height based on limited data from Intel refer‐...
  • Page 20 SOM-6898 User Manual...

  • Page 21: Chapter 3 Bios Operation

    Chapter BIOS Operation This chapter gives BIOS setup information for the SOM-6898 CPU Computer on Module. Sections include:  Introduction  Entering Setup  Hot / Operation Key  Exit BIOS Setup Utility...
  • Page 22 With the AMI BIOS Setup Utility, users can modify BIOS settings and control various system features. This chapter describes the basic navigation of the BIOS Setup Util- ity. Figure 3.1 Setup program initial screen AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.

  • Page 23: Entering Setup

    Entering Setup Turn on the computer and then press <ESC> or <DEL> to enter Setup menu. 3.1.1 Main Setup When users first enter the BIOS Setup Utility, they will enter the main setup screen. Users can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options.

  • Page 24: Advanced Bios Features Setup

    3.1.2 Advanced BIOS Features Setup Select the Advanced tab from the SOM-6898 setup screen to enter the Advanced BIOS Setup screen. Users can select any item in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. Users can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 25 3.1.2.1 CPU Configuration  Intel (VMX) Virtualization Technology When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.  Active Processor Core Number of cores to enable in each processor package. Hyper-Threading  Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Tech- nology) and Disabled for other OS (OS not optimized for Hyper-Threading Tech- nology) ...
  • Page 26 3.1.2.2 Power & Performance Figure 3.4 Power & Performance  CPU- Power Management Control CPU- Power Management Control Options  GT- Power Management Control GT- Power Management Control Options SOM-6898 User Manual...
  • Page 27  CPU- Power Management Control Figure 3.5 CPU- Power Management Control – Boot performance mode Select the performance state that the BIOS will set starting from reset vector – Intel® SpeedStep™ Allows more than two frequency ranges to be supported. –...
  • Page 28  GT- Power Management Control Figure 3.6 GT- Power Management Control – RC6 (Render Standby) Check to enable render standby support. SOM-6898 User Manual...
  • Page 29 3.1.2.3 PCH-FW Configuration  ME State Sets ME to soft temporary disabled.  Firmware Update Configuration Configures management engine technology parameters.  PTT Configuration Configure PTT SOM-6898 User Manual...
  • Page 30  Firmware Update Configuration Figure 3.7 Firmware Update Configuration – Me FW Image Re-Flash Enable/Disable Me FW Image Re-Flash function SOM-6898 User Manual...
  • Page 31  PTT Configuration Figure 3.8 PTT Configuration – TPM Device Selection Selects TPM device: PTT or dTPM. PTT- Enables PTT in SkuMgr dTPM 1.2- Disables PTT in SkuMgr Warning! PTT/dTPM will be disabled and all data saved on it will be lost. –...
  • Page 32 3.1.2.4 Trusted Computing Figure 3.9 Trusted Computing  Security Device Support Enables or Disables BIOS support for security devices. OS will not show secu- rity device. TCG EFI protocol and INT1A interface will not be available. SOM-6898 User Manual...
  • Page 33 3.1.2.5 ACPI Settings Figure 3.10 ACPI Settings  Enable ACPI Auto Configuration Enables or Disables BIOS ACPI Auto Configuration.  Enable Hibernation Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS. ...
  • Page 34 3.1.2.6 iManager Configuration Figure 3.11 iManager Configuration  CPU Shutdown Temperature Enable/Disable CPU Shutdown Temperature.  iManager Smart Fan – COM Module Control iManager Smart FAN function.  iManager Smart Fan – Carrier Board Control iManager Smart FAN Carrier Board function. ...
  • Page 35  Serial Port 1 Configuration Figure 3.12 Serial Port 1 Configurations – Serial Port Enable or disables serial port (COM). – Change Settings Select an optimal setting for Super IO device. SOM-6898 User Manual...
  • Page 36  Serial Port 2 Configuration Figure 3.13 Serial Port 2 Configurations – Serial Port Enable or disables. serial port (COM). – Change Settings Selects an optimal setting for Super IO device. SOM-6898 User Manual...
  • Page 37  Hardware Monitor Figure 3.14 Hardware Monitor – Hardware Monitor Information This item shows Hardware information parameters. SOM-6898 User Manual...
  • Page 38 3.1.2.7 W83627DHGSEC Super IO Configuration Figure 3.15 W83627DHGSEC Super IO Configuration  Serial Port 3 Configuration Set Parameters of Serial Port 3  Serial Port 4 Configuration Set Parameters of Serial Port 4  Parallel Port Configuration Set Parameters of Parallel Port (LPT/LPTE) SOM-6898 User Manual...
  • Page 39  Serial Port 3 Configuration Figure 3.16 Serial Port 3 Configurations – Serial Port Enable or disables serial port (COM). – Change Settings Select an optimal setting for Super IO device. SOM-6898 User Manual...
  • Page 40  Serial Port 4 Configuration Figure 3.17 Serial Port 4 Configurations – Serial Port Enable or disables. serial port (COM). – Change Settings Selects an optimal setting for Super IO device. SOM-6898 User Manual...
  • Page 41  Parallel Port Configuration Figure 3.18 Parallel Port Configuration – Parallel Port Enable or Disable Parallel Port (LPT/LPTE) – Change Settings Select an optimal setting for Super IO device. – Device Mode Change the Printer Port mode. SOM-6898 User Manual...
  • Page 42 3.1.2.8 Serial Port Console Redirection Figure 3.19 Serial Port Console Redirection – COM1 Console Redirection Console Redirection Enable or Disable – COM2 Console Redirection Console Redirection Enable or Disable – COM3 Console Redirection Console Redirection Enable or Disable – COM4 Console Redirection Console Redirection Enable or Disable –...
  • Page 43  Legacy Console Redirection Settings Figure 3.20 Legacy Console Redirection Settings – Legacy Serial Redirection Port Select a COM port to display redirection of Legacy OS and Legacy OPROM Messages SOM-6898 User Manual...
  • Page 44 3.1.2.9 Network Stack Configuration Figure 3.21 Network Stack Configuration  Network Stack Enable/Disable UEFI Network Stack. SOM-6898 User Manual...
  • Page 45 3.1.2.10 CSM Configuration Figure 3.22 CSM Configuration  CSM Support Enable/Disable CSM support.  GateA20 Active UPON Request- GA20 can be disabled using BIOS services. Do not allow dis- abling GA20; this option is useful when any RT code is executed above 1MB. ...
  • Page 46 3.1.2.11 NVMe Configuration Figure 3.23 NVMe Configuration  NVMe Configuration NVMe controller and driver information SOM-6898 User Manual...
  • Page 47 3.1.2.12 USB Configuration Figure 3.24 USB Configuration  Legacy USB Support Enables Legacy USB support. Auto option disables legacy support if no USB devices are connected. Disable option will keep USB devices available only for EFI applications.  XHCI Hand-off This is a workaround for OS without XHCI ownership change should be claimed by XHCI driver.

  • Page 48: Chipset

    3.1.3 Chipset Select the chipset tab from the SOM-6898 setup screen to enter the chipset BIOS Setup screen. You can display a chipset BIOS setup option by highlighting it using the <Arrow> keys. All Plug and Play BIOS setup options are described in this section. The Plug and Play BIOS Setup screen is shown below.
  • Page 49 3.1.3.1 System Agent (SA) Configuration Figure 3.26 System Agent (SA) Configuration  Memory Configuration Memory Configuration Parameters  Graphics Configuration Graphics Configuration Parameters  VT-d VT-d capability. SOM-6898 User Manual...
  • Page 50  Memory Configuration Figure 3.27 Memory Configuration – Max TOLUD Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD auto- matically based on largest MMIO length of installed graphic controller.   SOM-6898 User Manual...
  • Page 51  Graphics Configuration Figure 3.28 Graphics Configuration – Primary Display Select which of IGFX/PEG/PCI Graphics device should be Primary Display or select SG for Switchable Gfx. – LCD Panel Type Select LCD panel used by Internal Graphics Device by selecting the appro- priate setup item.
  • Page 52 3.1.3.2 PCH-IO Configuration Figure 3.29 PCH-IO Configuration  PCI Express Configuration PCI Express configuration settings.  SATA And RST Configuration SATA Device Options Settings  USB Configuration USB Configuration settings  HD Audio Configuration HD Audio Subsystem Configuration Settings  SCS Configuration Storage and Communication Subsystem (SCS) Configuration ...
  • Page 53  PCI Express Configuration Figure 3.30 PCI Express Configuration – PCI Express Root Port 0 PCI Express Root Port 0 settings. – PCI Express Root Port 1 PCI Express Root Port 1 settings. – PCI Express Root Port 2 PCI Express Root Port 2 settings. –...
  • Page 54 – PCI Express Root Port 0 Configuration Figure 3.31 PCI Express Root Port 0 Configuration PCI Express Root Port 0 Control the PCI Express Root Port. ASPM Set the ASPM level: Force L0s – Force all links to L0s state. Auto –...
  • Page 55 – PCI Express Root Port 1 Configuration Figure 3.32 PCI Express Root Port 1 Configuration PCI Express Root Port 1 Control the PCI Express Root Port. ASPM Set the ASPM level: Force L0s – Force all links to L0s state. Auto –...
  • Page 56 – PCI Express Root Port 2 Configuration Figure 3.33 PCI Express Root Port 2 Configuration PCI Express Root Port 2 Control the PCI Express Root Port. ASPM Set the ASPM level: Force L0s – Force all links to L0s state. Auto –...
  • Page 57 – PCI Express Root Port 3 Configuration Figure 3.34 PCI Express Root Port 3 Configuration PCI Express Root Port 3 Control the PCI Express Root Port. ASPM Set the ASPM level: Force L0s – Force all links to L0s state. Auto –...
  • Page 58 – PCI Express Root Port 4 Configuration Figure 3.35 PCI Express Root Port 4 Configuration PCI Express Root Port 4 Control the PCI Express Root Port. ASPM Set the ASPM level: Force L0s – Force all links to L0s state. Auto –...
  • Page 59  SATA And RST Configuration Figure 3.36 SATA And RST Configuration – SATA Controller(s) Enable/Disable SATA Device – SATA Mode Selection Determines how SATA controller(s) operate. – SATA Controller Speed Indicates the maximum speed the SATA controller can support. – Port 0 Enable or Disable SATA port –...
  • Page 60  USB Configuration Figure 3.37 USB Configuration – XHCI Disable Compliance Mode Options to disable Compliance Mode. Default is False to not disable Compliance Mode. Set TRUE to disable Com- pliance Mode. SOM-6898 User Manual...
  • Page 61  HD Audio Configuration Figure 3.38 HD Audio Configuration – HD Audio Control Detection of the HD-Audio device. Disabled= HDA will be unconditionally disabled Enabled= HDA will be unconditionally enabled Auto= HDA will be enabled if present, disabled otherwise. SOM-6898 User Manual...
  • Page 62  SCS Configuration Figure 3.39 SCS Configuration – eMMC 5.0 Controller Enable or Disable SCS eMMC 5.0 Controller – eMMC 5.0 HS400 Mode Enable or Disable SCS eMMC 5.0 HS400 Controller SOM-6898 User Manual...
  • Page 63  SB Porting Configuration Figure 3.40 SB Porting Configuration – SATA RAID ROM Legacy ROM: Legacy option ROM UEFI Driver: UEFI Raid Driver Both: Run the legacy Option ROM and UEFI driver. SOM-6898 User Manual...

  • Page 64: Security Setting

    3.1.4 Security Setting Figure 3.41 Security Setup Select Security Setup from the SOM-6898 Setup main BIOS setup menu. All Security Setup options, such as password protection is described in this section. To access the sub menu for the following items, select the item and press <Enter>: Change Administrator / User Password: Select this option and press <ENTER>...

  • Page 65: Boot Settings

    3.1.5 Boot Settings Figure 3.42 Boot Settings  Setup Prompt Timeout This item allows users to select the number of seconds to wait for setup activa- tion key. Number of seconds to wait for setup activation key. 65535(0xFFF) means indefinite waiting. ...

  • Page 66: Save & Exit

    3.1.6 Save & Exit Figure 3.43 Save & Exit  Save Changes and Exit When users have completed system configuration, select this option to save changes, exit BIOS setup menu and reboot the computer if necessary to take effect all system configuration parameters. ...
  • Page 67 the Optimal Defaults if the user's computer is experiencing system configuration problems.  Save User Defaults When users have completed system configuration, select this option to save changes as user defaults without exit BIOS setup menu. Restore User Defaults  Restore the User Defaults to all the setup options ...
  • Page 68 SOM-6898 User Manual...

  • Page 69: Chapter 4 S/W Introduction & Installation

    Chapter S/W Introduction & Installation Sections include:  S/W Introduction  Driver Installation  Advantech iManager...

  • Page 70: S/W Introduction

    S/W Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft Windows embedded technology." We enable Windows Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (Hardware suppliers, System integrators, Embedded OS distributor) for projects.

  • Page 71: Advantech Imanager

    More details of how to use the APIs and utilities, please refer to the Advantech iManager 2.0 Software API User Manual. SOM-6898 User Manual...
  • Page 72 SOM-6898 User Manual...

  • Page 73: Appendix A Pin Assignment

    Appendix Pin Assignment This appendix gives you the infor- mation about the hardware pin assignment of the SOM-6898 CPU System on Module. Sections include:  SOM-6898 Type 6 Pin Assign- ment...

  • Page 74: Som-6898 Type 6 Pin Assignment

    This section gives SOM-6898 pin assignment on COM Express connector which compliant with COMR.0 R2.1 Type 6 pin-out definitions. More details about how to use these pins and get design reference, please contact to Advantech for design guide, checklist, reference schematic, and other hardware/software supports.
  • Page 75 GND (FIXED) GND (FIXED) USB2- USB3- USB2+ USB3+ USB_2_3_OC# USB_0_1_OC# USB0- USB1- USB0+ USB1+ VCC_RTC EXCD1_PERST# EXCD0_PERST# EXCD1_CPPE# EXCD0_CPPE# SYS_RESET# LPC_SERIRQ CB_RESET# GND (FIXED) GND (FIXED) PCIE_TX5+ PCIE_RX5+ PCIE_TX5- PCIE_RX5- GPI0 GPO1 PCIE_TX4+ PCIE_RX4+ PCIE_TX4- PCIE_RX4- GPO2 PCIE_TX3+ PCIE_RX3+ PCIE_TX3- PCIE_RX3- GND (FIXED) GND (FIXED)
  • Page 76 PCIE_CLK_REF- VGA_RED GND (FIXED) GND (FIXED) SPI_POWER VGA_GRN SPI_MISO VGA_BLU GPO0 VGA_HSYNC SPI_CLK VGA_VSYNC SPI_MOSI VGA_I2C_CK TPM_PP VGA_I2C_DAT TYPE10# SPI_CS# SER0_TX RSVD SER0_RX RSVD A100 GND (FIXED) B100 GND (FIXED) A101 SER1_TX B101 FAN_PWMOUT A102 SER1_RX B102 FAN_TACHIN A103 LID# B103 SLEEP# A104...
  • Page 77 RSVD DDI1_PAIR0+ RSVD DDI1_PAIR0- RSVD RSVD DDI1_PAIR1+ DDI1_PAIR1- GND (FIXED) GND (FIXED) DDI2_CTRLCLK_AUX+ DDI1_PAIR2+ DDI2_CTRLDATA_AUX- DDI1_PAIR2- DDI2_DDC_AUX_SEL DDI1_DDC_AUX_SEL RSVD RSVD DDI1_PAIR3+ DDI1_PAIR3- RSVD DDI2_PAIR0+ DDI2_PAIR0- GND (FIXED) GND (FIXED) DDI2_PAIR1+ DDI2_PAIR1- DDI2_HPD RSVD RSVD DDI2_PAIR2+ DDI2_PAIR2- RSVD RSVD DDI2_PAIR3- DDI2_PAIR3- GND (FIXED) GND (FIXED) GND (FIXED)
  • Page 78 RSVD RSVD GND (FIXED) GND (FIXED) RSVD RSVD GND (FIXED) GND (FIXED) RSVD RSVD C100 GND (FIXED) D100 GND (FIXED) C101 D101 C102 D102 C103 D103 C104 VCC_12V D104 VCC_12V C105 VCC_12V D105 VCC_12V C106 VCC_12V D106 VCC_12V C107 VCC_12V D107 VCC_12V C108...

  • Page 79: Appendix B Watchdog Timer

    Appendix Watchdog Timer This appendix gives you the infor- mation about the watchdog timer programming on the SOM-6898 CPU System on Module. Sections include:  Watchdog Timer Programming...

  • Page 80: Programming The Watchdog Timer

    Programming the Watchdog Timer Trigger Event Note (BIOS setting default disable)** Power button event Power Off Support H/W Restart Support WDT Pin Activate Support ** WDT new driver support automatically selects available IRQ number from BIOS, and then sets EC. Only Win 10 supports it. In other OS, it will still use IRQ number from BIOS setting as usual.

  • Page 81: Appendix C Programming Gpio

    Appendix Programming GPIO This Appendix gives the illustra- tion of the General Purpose Input and Output pin setting. Sections include:  System I/O Ports...

  • Page 82: Gpio Register

    GPIO Register GPIO Byte Mapping H/W Pin Name BIT0 GPO0 BIT1 GPO1 BIT2 GPO2 BIT3 GPO3 BIT4 GPI0 BIT5 GPI1 BIT6 GPI2 BIT7 GPI3 For details, please refer to iManager & Software API User Manual. SOM-6898 User Manual...

  • Page 83: Appendix D System Assignments

    Appendix System Assignments This appendix gives you the infor- mation about the system resource allocation on the SOM-6898 CPU System on Module. Sections include:  System I/O ports  Interrupt Assignments  1st MB Memory Map...

  • Page 84: System I/O Ports

    System I/O Ports Table D.1: System I/O ports Addr.Range(Hex) Device 0000-0CF7 PCI Express Root Complex 0020-0021 Programmable interrupt controller 0024-0025 Programmable interrupt controller 0028-0029 Programmable interrupt controller 002C-002D Programmable interrupt controller 002E-002F Motherboard resources 0030-0031 Programmable interrupt controller 0034-0035 Programmable interrupt controller 0038-0039 Programmable interrupt controller 003C-003D...

  • Page 85: Interrupt Assignments

    Table D.1: System I/O ports 164E-164F Motherboard resources 1800-18FE Motherboard resources 1854-1857 Motherboard resources F000-F03F Intel(R) HD Graphics 620 F040-F05F Mobile 6th Generation Intel(R) Processor Family I/O SMBUS-9D23 F060-F07F Standard SATA AHCI Controller F080-F083 Standard SATA AHCI Controller F090-F097 Standard SATA AHCI Controller FF00-FFFE Motherboard resources FFFF-FFFF...

  • Page 86: 1St Mb Memory Map

    1st MB Memory Map Table D.3: 1st MB Memory Map Addr. Range (Hex) Device 0x000A0000-0x000BFFFF PCI Express Root Complex 0x90000000-0xDFFFFFFF PCI Express Root Complex 0xC0000000-0xCFFFFFFF Intel(R) HD Graphics 620 0xDE000000-0xDEFFFFFF Intel(R) HD Graphics 620 0xDF000000-0xDF01FFFF Intel(R) I210 Ethernet Connection I219-V 0xDF020000-0xDF02FFFF High Definition Audio Controller 0xDF030000-0xDF03FFFF...
  • Page 87 Table D.3: 1st MB Memory Map 0xFED90000-0xFED93FFF Motherboard resources 0xFEE00000-0xFEEFFFFF Motherboard resources 0xFF000000-0xFFFFFFFF Legacy device 0xFF000000-0xFFFFFFFF Motherboard resources SOM-6898 User Manual...
  • Page 88 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2018...

This manual is also suitable for:

Som-6898Som-6898c5-u6a2eSom-6898c5z2-u6a2eSom-6898c7-u8a2eSom-6898c7z2-u8a2eSom-6898cr-u4a2e