Advantech SOM-DH5000 User Manual

Development board for com hpc server size d

Hide thumbs

Table Of Contents

Quick Links

Download this manual

User Manual

SOM-DH5000

Development Board for COM

HPC Server Size D

Table of Contents

Need help?

Do you have a question about the SOM-DH5000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Advantech SOM-DH5000

Page 1 User Manual SOM-DH5000 Development Board for COM HPC Server Size D...
Page 2: Product Warranty (2 Years)
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.
Page 3: Declaration Of Conformity
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This type of cable is available from Advantech. Please contact your local supplier for ordering information.
Page 4: Warnings, Cautions, And Notes
Note! Notes provide optional additional information. Document Feedback To assist us with improving this manual, we welcome all comments and constructive criticism. Please send all feedback in writing to support@advantech.com. Selection Guide Part No. Description COM-HPC Development Board for Client Pinout with 5mm-height...
Page 5: Safety Instructions
In accordance with IEC 704-1:1982 specifications, the sound pressure level at the operator’s position should not exceed 70 dB (A). DISCLAIMER: These instructions are provided according to IEC 704-1 standards. Advantech disclaims all responsibility for the accuracy of any statements contained herein. SOM-DH5000 User Manual...
Page 6: Safety Precautions - Static Electricity
Do not touch any components on the CPU card or other cards while the PC is powered on. Disconnect the power before making any configuration changes. A sudden rush  of power after connecting a jumper or installing a card may damage sensitive electronic components. SOM-DH5000 User Manual...
Page 7: Table Of Contents
Figure 2.4 Board Mechanical Diagram - Side 2......8 Assembly Diagram ..................9 Figure 2.5 Assembly Diagram ............. 9 Chapter Connectors and Jumper Settings ..11 SOM-DH5000 Connectors and Jumper Settings ........12 3.1.1 Connector Locations ..............12 Figure 3.1 Connector Locations..........12 3.1.2 Jumper Locations................ 12 Figure 3.2 Jumper Locations .............
Page 8 Table 3.34:PEX8_1/PEX8_2 PCIe Re-Driver Switch Settings (PCIEX8_1, PCIEX8_2 Slot) ........28 Table 3.35:PEX4_0/PEX4_1 PCIe Re-Driver Switch Settings (PCIEX4_0,PCIEX4_1 Slot) ........28 Table 3.36:M2M1, M2M2 PCIe Re-Driver Switch Settings ..29 Table 3.37:PEX4_2/PEX4_3 PCIe Re-Driver Switch Settings (PCIEX4_2,PCIEX4_3 Slot) ........29 SOM-DH5000 User Manual viii...
Page 9: Chapter 1 General Information
Chapter General Information This chapter details background information on the SOM-DH5000 Development Board for COM-HPC. Sections include:  Introduction  Functional Block Diagram  Product Specifications...
Page 10: Introduction
Introduction The Advantech SOM-DH5000 development carrier board complies with PICMG COM-HPC pinout standards and is compatible with modules of corresponding form factors. It utilizes 400-pin connectors and supports several display connectors (eDP, DP++, HDMI) and USB types (USB 3.0 Type A and Type C). Additionally, it accom- modates M.2 E-Key connectors and HD audio.
Page 11: Block Diagram
Block Diagram Figure 1.1 Block Diagram SOM-DH5000 User Manual...
Page 12 SOM-DH5000 User Manual...
Page 13: Chapter 2 Mechanical Information
Chapter Mechanical Information This chapter details mechanical information for the SOM-DH5000 Development Board for COM-HPC. Sections include:  Board Information  Mechanical Diagrams  Assembly Diagram...
Page 14: Board Information
Board Information The figure below indicates the main chips on the SOM-DH5000 Development Board for COM-HPC. Figure 2.1 Board Chips ID - Front SOM-DH5000 User Manual...
Page 15: Mechanical Diagram
Mechanical Diagram For more information regarding the following 2D/3D models, please visit the Advant- ech COM support service website: http://com.advantech.com. Figure 2.2 Board Mechanical Diagram - Front Figure 2.3 Board Mechanical Diagram - Side 1 SOM-DH5000 User Manual...
Page 16 Figure 2.4 Board Mechanical Diagram - Side 2 SOM-DH5000 User Manual...
Page 17: Assembly Diagram
Assembly Diagram These figures demonstrate the order of assembly for attaching the thermal module and COM module to the carrier board. Figure 2.5 Assembly Diagram SOM-DH5000 User Manual...
Page 18 SOM-DH5000 User Manual...
Page 19: Chapter 3 Connectors And Jumper Settings
Chapter Connectors and Jumper Settings This chapter details information on the connector and jumper set- tings for the SOM-DH5000 Devel- opment Board for COM-HPC.
Page 20: Som-Dh5000 Connectors And Jumper Settings
SOM-DH5000 Connectors and Jumper Settings 3.1.1 Connector Locations Figure 3.1 Connector Locations 3.1.2 Jumper Locations Figure 3.2 Jumper Locations SOM-DH5000 User Manual...
Page 21: Switch Locations
3.1.3 Switch Locations Figure 3.3 Switch Locations 3.1.4 I/O Connector Locations Figure 3.4 I/O Connector Locations 3.1.5 Button Locations Figure 3.5 Button Locations SOM-DH5000 User Manual...
Page 22: Led Locations
3.1.6 LED Locations Figure 3.6 LED Locations SOM-DH5000 User Manual...
Page 23: Connector List
System Reset Button Pin TAMPER1 Tamper Pin Header SET_PH1 Header USB 2.0 Port 4, 5, 6, and USB 3.0/2.0 Port 0 and Port USB2_1 USB3_01 1 Connector CRT and COM-HPC VGA_COM1 UART Port 0 DB9 Con- nector SOM-DH5000 User Manual...
Page 24: Jumper, Switch, And Button List
PCIEX4_4 TX*2, RX*2 PCIEX4_5 TX*2, RX*2 PCIEX4_5 TX*2, RX*2 M2M1 TX*2, RX*2 M2M1 TX*2, RX*2 M2M2 TX*2, RX*2 M2M2 TX*2, RX*2 USB 2.0 Port2 to USB 2.0 Port2 to USB2_SW USB2_SW LAN2_USB23 or BMC LAN2_USB23 or BMC SOM-DH5000 User Manual...
Page 25: Led Function List
SLP_S3 Signal Ready Indication SLP_S4_S5_LED1 SLP_S4/SLP_S5 Signal Ready Indication CB_RESET_LED1 Carrier Board Reset Indication THRMTRIP_LED1 Module occurs Thermal Trip Indication WDTOUT_LED1 Watchdog Indication LED1 BMC Heart Beat LED indicator BOOT_SRC_SEL_LED Redundant BIOS SPI Flash Indication BMC_ERR_LED1 BMC Error occurs Indication SOM-DH5000 User Manual...
Page 26: Connector Pin Definitions
3.1.10 Connector Pin Definitions Table 3.5: ATX1 ATX Connector Signal Signal +V3.3 +V3.3 +V3.3 CN_PSON# PWR_OK +V5SB +V12 +V12 +V3.3 Table 3.6: ATX12V1, SLOT12V1 DC 12V Input Connector 1 and 2 Pins Signal Signal 1,2,3,4 5,6,7,8 +V12 SOM-DH5000 User Manual...
Page 27 Table 3.7: BH1 RTC Battery Socket Signal Signal +VBAT_BH Table 3.8: BMC_SMB_HDR Pin Header Signal BMC_SMB_CLK8 BMC_SMB_DATA8 Table 3.9: CN10 GPIO Pin Header Signal Signal GPIO0 GPIO6 GPIO1 GPIO7 GPIO2 GPIO8 GPIO3 GPIO9 GPIO4 GPIO10 GPIO5 GPIO11 SOM-DH5000 User Manual...
Page 28 Table 3.10: COM2 COM-HPC UART Port 1 Wafer Box Signal Signal COM1_RXD COM1_RTS# COM1_TXD COM1_CTS# Table 3.11: COM3 BMC Debug Console Wafer Box Pins Signal Signal 1,2,4,6,7,8,10 BMC_UART_RXD5 BMC_UART_TXD5 Table 3.12: COM4 BMC UART Port 1 Wafer Box Signal Signal BMC_COM3_RX BMC_COM3_RTS# BMC_COM3_TXD BMC_COM3_CTS# SOM-DH5000 User Manual...
Page 29 +V3.3 Test Point Test Point +V1.8_DUAL GPSPI_ALERT# PLTRST# +V5_DUAL Table 3.14: I2C0 COM-HPC I2C Port 0 Wafer Box (3.3V) Signal I2C0_DAT I2C0_CLK +V3.3_DUAL Table 3.15: I2C1 COM-HPC I2C Port 1 Wafer Box (1.8V) Signal I2C1_DAT I2C1_CLK +V1.8_DUAL SOM-DH5000 User Manual...
Page 30 OCP2 Signal SMB_CLK SMB_CLK +VIN_OCP +VIN_OCP SMB_DAT SMB_DAT +VIN_OCP +VIN_OCP +VIN_OCP +VIN_OCP ETH0- ETH4- 3_PHY_RST# 7_PHY_RST# ETH2_TX+ ETH6_TX+ ETH0-3_INT# ETH4-7_INT# ETH2_TX- ETH6_TX- ETH1_INT# ETH5_INT# +V5_DUAL +V5_DUAL KRA_LED1_0# KRA_LED5_0# ETH0_TX+ ETH4_TX+ KRA_LED1_1# KRA_LED5_1# ETH0_TX- ETH4_TX- ETH3_TX+ ETH7_TX+ KRA_LED0_0# KRB_LED4_0# SOM-DH5000 User Manual...
Page 31 ETH5_RX+ P_I2C_CLK ETH1_SF- ETH5_SFP_I2C_- ETH1_RX- ETH5_RX- P_I2C_DAT ETH3_SF- ETH7_SFP_I2C_- ETH2_SF- ETH6_SFP_I2C_- P_I2C_CLK P_I2C_CLK ETH3_SF- ETH7_SFP_I2C_- ETH2_SF- ETH6_SFP_I2C_- P_I2C_DAT P_I2C_DAT ETH2_INT# ETH6_INT# ETH3_INT# ETH7_INT# OCPA_PRSNTC OCPB_PRSNTC ETH0_SDP ETH4_SDP ETH1_SDP ETH5_SDP ETH2_SDP ETH6_SDP ETH3_SDP ETH7_SDP ETH0- ETH4- 3_PHY_INT# 7_PHY_INT# SOM-DH5000 User Manual...
Page 32 Table 3.19: BATLOW1, BATLOW# Jumper Pins Function Battery Low Normal [Default] Table 3.20: CB_PWROK, Power OK Signal Pull Down or Floating Selection Pins Function PWROK Signal Pull Down PWROK Signal connect to Module [Default] PWROK Signal is floating SOM-DH5000 User Manual...
Page 33 Table 3.24: J3, COM-HPC Module +V5SB Supply Pins Function Not supply +V5SB to COM HPC Module Supply +V5SB to COM HPC Module [Default] Table 3.25: J4, Normal Operation / Clear CMOS SEL Pins Function Clear CMOS Normal Operation [Default] SOM-DH5000 User Manual...
Page 34 Table 3.29: J9, BMC SPI Flash Hold SEL Pins Function BMC Software Enable [Default] BMC Software Disable Table 3.30: LPVDD_SEL1, eSPI or LPC of BMC Power SEL Pins Function BMC Power LPVDD 3.3V for LPC mode BMC Power LPVDD 1.8V for eSPI mode [Default] SOM-DH5000 User Manual...
Page 35 USB 2.0 Port 2 connect to LAN1 USB23 USB 2.0 Port 2 connect to BMC [Default] *For PCIe Redriver Control Settings: TI DS320PR810 Table 3.32: Switch Settings (PCIe Re-Driver, M2MX) Pins Function L0, or L2 2-Mid Floating, or L4 L1, or L3 SOM-DH5000 User Manual...
Page 36 Lanes 16-19/40-43 2-Mid, 2-Mid (L4) 2-Mid, 1-2 (L2) Lanes 20-23/44-47 2-Mid, 2-Mid (L4) 2-Mid, 1-2 (L2) Table 3.35: PEX4_0/PEX4_1 PCIe Re-Driver Switch Settings (PCIEX4_0,PCIEX4_1 Slot) PCIe Lanes Lanes 12-15 / 0-3 2-Mid, 2-Mid (L4) 2-Mid, 2-Mid (L4) SOM-DH5000 User Manual...
Page 37 Table 3.36: M2M1, M2M2 PCIe Re-Driver Switch Settings PCIe Lanes Lanes 12-15 / 0-3 2-Mid, 2-Mid (L4) 2-Mid, 2-Mid (L4) Table 3.37: PEX4_2/PEX4_3 PCIe Re-Driver Switch Settings (PCIEX4_2,PCIEX4_3 Slot) PCIe Lanes Lanes 4-7 / 8-11 2-Mid, 2-Mid (L4) 2-Mid, 2-Mid (L4) SOM-DH5000 User Manual...
Page 38 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2024...

This manual is also suitable for:

Som-dh5000-00a1