Related Manuals for Mercia Garden Products SI-100-004-0002
Summary of Contents for Mercia Garden Products SI-100-004-0002
- Page 1 MADE IN GREAT BRITAIN 2mm Drill bit Water proof Preservative ANY QUESTIONS? Scan the QR code to contact us via our customer portal.
- Page 2 ACCESSING VIDEO GUIDES... ACCESSING VIDEO GUIDES... 3. Scan QR code... Some steps within this set of instructions come with an added video guide for your convenience. These can be accessed via the QR code and used to aid you in constructing that step.
-
Page 3: Table Of Contents
What building do I have? All of our modular Greenhouses have di erent names and di erent components, so it’s important to understand what building you have and what comes with it before beginning assembly. Please refer to the information below to check what type of building you have before beginning construction. This instruction manual contains generic steps to t the Polycarbonate glazing into all our greenhouses. -
Page 4: 6Ft Apex Building Contents
QTY 3 QTY 1 QTY 1 QTY 24* QTY 10 QTY 10 METERS QTY 10 METERS QTY 14 QTY 74 SI-100-004-0002 6 X 6 APEX GREENHOUSE QTY 11 QTY 5 QTY 1 QTY 1 QTY 24* QTY 14 QTY 12 METERS... -
Page 5: Missing Parts
4ft Pent Building Glazing Contents: Tip: Labelling your parts, using a pencil and masking tape, may help you In the table to follow, please refer to the row with your chosen building size in to determine how many of to identify them easier when you need them. each part is required. -
Page 6: Glazing Sheet Guide
Glazing Sheet guide: The method of glazing your Roof Panels/sash windows and Wall Panels is the same, regardless of building size. Please refer to the guide below to ensure you pair the correct glazing size with the correct panel. Wall Panels Window *IMPORTANT* Ensure to measure each of your glazing sheets... -
Page 7: Pre-Assembly
Pre-Assembly Before glazing your panels, ensure your assembled building is fully treated. Each sheet of glazing will have a plain blue lm on one side. The other side will have clear lm with printed text on. The clear side with printed text on is the side that is UV protected, and must be facing outwards when tted into your... -
Page 8: Polycarbonate Sheet Prep
Before glazing, please make sure you have fully assembled and treated your building. Polycarbonate Sheet Prep Parts Needed Building No. 1 No. 2 (a, b or c ) No. 3 No. 6 No. 7 No. 8 All PC sheets TOTAL QTY REQUIRED FOR BUILDING Ensure the Glazing sheets (No. -
Page 9: Roof Panel Glazing
All Polycarbonate glazing sheets must be prepared and taped before using for assembly. Before glazing, please make sure you have fully assembled If you have not yet prepared and taped your Polycarbonate glazing sheets, please refer and treated your building. to the previous page. -
Page 10: Wall Panel Glazing
All Polycarbonate glazing sheets must be prepared and taped before using for assembly. Before glazing, please make sure you have fully assembled If you have not yet prepared and taped your Polycarbonate glazing sheets, please refer and treated your building. to the previous page. -
Page 11: After Treatment
After Treatment Once your building is fully glazed, touch up any areas where the treatment has been removed or slightly scu ed. **Make sure to check any Beading Strips that have been cut to size post-treatment. Ensure to remove the ‘UV protected’ label from the top of your glazing sheets and remove any left over residue.
Need help?
Do you have a question about the SI-100-004-0002 and is the answer not in the manual?
Questions and answers