Dell PowerEdge DR715 Hardware Owner's Manual page 21

Table 1-5. LCD Status Messages (continued)
Code Text
E122E CPU # VDDA
E122F 2.5V PwrGd
E1231 1.2V HTCORE
PwrGd
E1232 VDD 12V PS#
PwrGd
E1233 Cabled PS
PwrGd
E1234 PCIX-12V
PwrGd
E1235 USB 1.8V
Linear PwrGd
E1236 VID 1.8V Mem
Linear PwrGd
E1237 VID 1.2V
Linear PwrGd
E1238 VID 1.8V
Linear PwrGd
E1239 2.5VAux LOM
Linear PwrGd
E123A 1.2VAux LOM
Linear PwrGd
Causes
Processor # VDDA voltage
has exceeded the allowable
voltage range.
2.5V voltage regulator has
failed.
1.2V HTCORE voltage
regulator has failed.
The specified power supply
has failed or has been
removed from the bay while
the system was on.
Power supply voltage
regulator failed.
PCI-X -12V voltage regulator
has failed.
1.8V voltage regulator for
the USB linear has failed.
Linear memory 1.8V voltage
regulator has failed.
1.2V video voltage regulator
has failed.
1.8V video voltage regulator
has failed.
Aux 2.5V voltage regulator
for LOM1 has failed.
1.2V voltage regulator for
LOM has failed.
Corrective Actions
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
If removed, reinsert the
power supply into the bay
and reconnect to power.
For component failures,
see "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
About Your System
21