Dell PowerEdge DR715 Hardware Owner's Manual page 125

4 Remove the processor shroud. See "Removing the Processor Shroud" on
page 72.
5 Disconnect the fan's power cable from the system board.
6 Press and hold the fan release tab, and slide the fan in the direction of the
arrow and out of the securing slots (see Figure 3-32).
7 Replace the system fan. See "Installing the System Fan" on page 126.
Figure 3-32. Removing and Installing the System Fan
1
1 system fan
3 fan release tab
3
2
Installing System Components
2
securing slots
125