Angelo Decor AD49338 Instructions

Fountain Kit Instructions
Splash Line
For dramatic spill points
our innovative splash line
helps to curb splash and
sound.
Levelling Shims
If you find that your fountain does not sit level
because of uneven ground or other factors,
levelling shims can be used to address this
problem.
Slide the shim under the edge of a low side or
under a seciton of the fountain to adjust the
level or water flow. Repeat as needed.
Tubing
This kit includes sections of 1/2", 3/4" and 1"
inside diamter tubing. Used alone or in
combination, they can help to replace a
damaged section of tubing or bridged together
to accomodate different pump fittings.
To use, place the weighted
end of the string inside the
bowl and drape the string
over the spill.
The splash line can be
trimmed as desired to
modify the sound and
splash effect.
Splash Foam
The black foam sections included in
this kit can be cut, shaped or
modified to affect water flow.
Placed along a spill point, they will
help to smoothen water flow;
placed at the base of spill, it will
help to reduce splash.
Epoxy Putty
For structural repairs or to
address a pinhole or crack
leak, an epoxy putty is ideal.
See the included instructions
for application advice.
AD49338
The sound and splash
generated increases as
the distance from the end
of the sting to the water
line does.
Printed in China