Figure 3-2. Removing or Installing a Hard-Drive Blank
1
1
release lever
3
2.5-inch hard-drive blank
Installing a Hard-Drive Blank
Align the hard-drive blank with the drive bay and insert the blank into the
hard-drive bay until the release lever clicks into place. See Figure 3-2.
Removing a Hard Drive From a Hard-Drive Carrier
1 Turn over the hard drive and remove the four screws from the slide rails on
the hard-drive carrier. See Figure 3-3.
2 Lift the hard drive out of the hard-drive carrier.
50
Installing System Components
2
2
3.5-inch hard-drive blank
3