Dell PowerEdge C1100 Hardware Owner's Manual page 20

Table 1-7. System Identification Indicators
System Identification Indicator
Steady blue
Blinks blue blinking
Blue off
Table 1-8. Power Indicator Codes
Power Indicator
Steady green
Steady yellow
Yellow off
Table 1-9. Fault Indicator Codes
Fault Indicator
Amber blinking
Amber off
20
About Your System
Condition
IPMI using chassis identify command on or
ID button press identification on.
Only IPMI using chassis identify command
blink on.
IPMI using chassis identify command off or
ID button press identification off.
Condition
Power supply is on (AC OK/DC OK) or in
standby mode (90–264 VAC)
Power supply faulty
(UVP/OVP/OCP/SCP/OTP/Fan Fault)
Power supply is off or AC input
voltage is out of normal operating range
(90 VAC–264 VAC)
Condition
System failure
or
Non-critical failure: non-critical fan,
voltage, temperature state, or CPU thermal
trip.
No system failure
or
Off