THORLABS MTDEVAL User Manual page 25

Example
© 2016 Thorlabs GmbH
You have loaded settings from a file.
You will see the differing from the previous settings
highlighted. Now you have the choice:
1. You can press the Save Settings in MTD Flash button to
transfer the new data to the volatile memory and to the flash.
This way, all changed parameters become active and will be
saved permanently.
2. Click to one of the highlighted parameters and press the
Enter key. This way, all changed parameters become active,
but they are not stored to the flash.
8 Operating a MTD415xE Module
23